Filter
Top Products
28 Input Channels
01V96i—Reference Manual
4. To cancel a pair, move the cursor to the
desired channel’s STEREO button, then press
[ENTER].
Naming Input Channels
By default, Input Channels are named CH1, CH2, etc. You
can change these names if desired. For example, it may be
helpful for mixdown if you name a particular Input Channel
with the type of musical instrument connected to the corre-
sponding input jack.
1. Press the DISPLAY ACCESS [PATCH] button
repeatedly until the Patch | IN Name page
appears.
You can specify Short names in the center column (1)
and Long (full) names in the right column (
2).
When the Name Input Auto Copy check box (
3) is on,
the first four characters of a newly-entered Long name are
automatically copied to the Short name. On the other
hand, a newly-entered Short name is automatically added
to the beginning of the Long name.
You can reset all channel names to their default names by
moving the cursor to the INITIALIZE button, then press-
ing [ENTER].
2. Move the cursor to a name you wish to
change, then press [ENTER].
The Title Edit window appears, enabling you to enter a
name.
3. Edit the name, move the cursor to the OK but-
ton, then press [ENTER].
The new name is now effective.
Tip: You can also create or cancel a pair of Output Channels
in the same way on the Pair/Grup | Output page (see
page 33).
Tip: The edited name is stored in the Input Patch library.
13 2