Yamaha 01V96i Music Mixer User Manual


 
Setting Aux Out 1–8 from the Display 37
01V96i—Reference Manual
Aux Outs
Delaying Aux Outs
To delay Aux Out 1–8 signals, press the DISPLAY ACCESS
[ /INSERT/DELAY] button repeatedly until the
/INS/DLY | Out Dly page appears.
The parameters on this page (and the procedure for setting
them) are the same as for Input Channels, except that this
page does not include the MIX/FB.GAIN parameters (see
page 18).
Comp settings
To set the Aux Out 1–8 compressors, press the DISPLAY
ACCESS [DYNAMICS] button, then press the [F3] button to
display the Dynamics | Comp Edit page, then select the
desired Aux Out 1–8 by using the corresponding [SEL] but-
tons.
The parameters on this page (and the procedure for setting
them) are the same as for Input Channels (see page 20).
EQ settings
To set the EQ for Aux Out 1–8, press the DISPLAY ACCESS
[EQ] button, then press the [F1] button to display the EQ | EQ
Edit page, then use the [SEL] buttons to select Aux Out 1–8.
The parameters on this page (and the procedure for setting
them) are the same as for Input Channels (see page 21).
Viewing Aux Out Settings
You can view and adjust the parameter settings for the cur-
rently-selected Aux Out on the View | Parameter and Fader
pages.
Viewing the Compressor and EQ
Settings
To display the View | Parameter page, use the corresponding
[SEL] button to select the desired Aux Out (1–8), then press
the DISPLAY ACCESS [VIEW] button, then press the [F1]
button.
The parameters on this page (and the procedure for setting
them) are the same as for Input Channels, except that this
page does not include the Gate and Phase parameters (see
page 23).
Tip: You can also display the Out Dly page if you select the desired
Aux Out (1–8) by pressing the corresponding [SEL] button while
the DLY-related parameters are indicated on the page.