Filter
Top Products
56 Surround Pan
01V96i—Reference Manual
Surround Panning
You can set the surround pan parameters for each Input
Channel.
1. Make sure that the 01V96i is in any Surround
mode except Stereo, then press the [SEL] but-
ton of the channel for which you want to set
surround pan.
2. Press the DISPLAY ACCESS [PAN/ROUTING]
button repeatedly until the Pan/Route | Ch
Edit page appears.
The Ch Edit page displays the selected Input Channel,
and its surround pan setting and available pair partner.
The following display page is an example in 6.1 Surround
mode.
The following parameters are available on this page:
1 Surround pan graph
This graph indicates the pan positions in a two-dimen-
sional field, with the listening position in the center. A
small diamond ( ) indicates the current surround pan
position. You can move the current surround pan posi-
tion ( ) directly to one of the speaker icons by select-
ing its icon, then pressing [ENTER].
2 Trajectory patterns
These buttons represent seven trajectory patterns that
determine how the surround pan moves when you oper-
ate the Parameter wheel or the [INC]/[DEC] buttons.
3 FAST
Turning on this button increases the speed of sound
images panned via the Parameter wheel.
4 Trajectory pattern parameters
These parameters fine-tune the surround pan trajectory
pattern.
• WIDTH ............This parameter sets the left-to-right
width of the selected trajectory pat-
tern.
• DEPTH .............This parameter sets the front-to-rear
width of the selected trajectory pat-
tern.
• OFFSET ............This parameter offsets the
left-to-right direction of the selected
trajectory pattern.
• OFFSET ............This parameter offsets the
front-to-rear direction of the
selected trajectory pattern.
5 LFE
This parameter control sets the level of the LFE (Low Fre-
quency Effects) Channel signal routed to the subwoofer,
and appears only in 5.1 and 6.1 Surround modes.
6 F/R
In 6.1 Surround mode, F and R parameter controls
appear. The F parameter control determines how the
Front Center signal is fed to the Left and Right channels,
and the R parameter control determines how the rear sur-
round signal is fed to the Left and Right surround chan-
nels.
6 DIV
This parameter control, instead of the F/R parameter
control, appears in 3-1 or 5.1 Surround mode, and deter-
mines how the Center signal is fed to the Left, Right, and
Center channels. It is expressed as a percentage ranging
from 0 to 100%. When you set the parameter to 100, the
Center signal is fed to only the Center channel. When you
set the parameter to 0, the Center signal is fed to only the
Left and Right channels. When you set the parameter to
50, the Center signal is fed equally to the Left, Right, and
Center channels.
7 LINK
This button is available only in 6.1 Surround mode. When
you turn on this button, the F and R controls are set to the
same value, and linked together.
8 ST LINK
Turning on this button links the surround pan parame-
ters of two Input Channels that are currently displayed on
the page (Stereo Link function). You can link the sur-
round pan parameters of two channels regardless of
whether they are paired.
9 PATTERN
When Input Channels are linked by the Stereo Link func-
tion, the seven patterns selectable here determine how the
linked surround pan moves via the Parameter wheel and
the [INC]/[DEC] buttons.
123
54 6 97 8