Filter
Top Products
Track editing
134
4
Insert a CD into the CD-RW drive.
You can import data from the following types of
media.
●Audio data (CD-DA)
•Audio CD
• CD-Extra (only the first session of CD-DA)
• Mixed Mode CD (only CD-DA data of the sec-
ond and later tracks)
●WAV files
• ISO9660 Level 1 format CD-ROM, CD-R, CD-
RW*
• Mixed Mode CD
*The directory name and file name cannot use char-
acters other than uppercase alphanumeric charac-
ters and the “_” (underscore) character. If you use
the AW16G to export WAV files onto CD-R/RW
media, the data will be in ISO9660 Level 1 format,
but please be aware of this restriction if you use a
computer to create WAV files.
5
In the Work Navigate section, repeatedly
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [ ]/[ ]
keys to access the CD IMPORT page.
The READ CD INFO button will appear in the cen-
ter of the display.
6
Press the [ENTER] key.
The display will indicate “Read CD Info...,” and
information will be read from the CD inserted in the
CD-RW drive.
Depending on the import-source data, the screen
will change as follows.
● When importing from audio CD/CD-Extra
1 From CD TRACK
Specifies the audio track number (01–99) of the
import-source CD.
B From Start
Specifies the beginning of the data that will be
imported, in minutes/seconds/frames (1/75 second).
C From End
Specifies the end of the data that will be imported,
in minutes/seconds/frames (1/75 second).
Tip!
Tip!
The “frames” referred to here are the minimum time-axis
units used in CD-DA. Do not confuse them with the
frames used in MTC or SMPTE.
D LISTEN button
You can move the cursor to this button and press
the [ENTER] key to repeatedly hear the currently
selected region of the CD-DA.
E To TRACK
Selects the track number into which the data will be
imported. If the import-source is an audio CD or a
stereo WAV file, you will only be able to select a
pair of tracks 1/2–15/16.
F To V.TR
Selects the virtual track number (1–8) into which
the data will be imported.
G To Start
Specifies the starting location (in counter-display
format) of the import-destination to which the data
will be imported.
5 6 7
1 42 3