Yamaha AW 16G Musical Instrument User Manual


 
Overdubbing
58
Overdubbing
Now you can overdub onto the track that you selected as
the recording-destination.
1
In the Work Navigate section, repeatedly
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [ ]/[ ]
keys to access the VIEW page.
2
Move the cursor to the metronome button,
and press the [ENTER] key to switch the set-
ting on or off as desired.
You can perform overdubbing whether the metro-
nome is on or off.
3
In the transport section, hold down the REC
[] key and press the PLAY [ ] key.
The metronome will begin sounding, and the
counter display will advance.
4
While monitoring the previously-recorded
tracks, play the instrument that you want to
overdub.
5
To stop recording, press the STOP [] key.
The [UNDO/REDO] key in the data entry / control
section will light.
6
To listen to the recorded performance from
the beginning, press the RTZ [ ] key to
return the counter display to zero, and press
the PLAY [ ] key.
Tip!
Tip!
If you recorded from the middle of the song, you can
press the [IN] key to move to the location at which you
began recording.
7
If you are satisfied with the recorded perfor-
mance, save the song. (For details on saving
p. 63)
If you decide to re-do the recording, press the
[UNDO/REDO] key to cancel the recording, and
repeat steps 3–7.