Yamaha AW 16G Musical Instrument User Manual


 
Using libraries and scene memories
80
Using the Recall Safe function
You can specify that specific faders or specific channels
will be excluded from Recall operations when the scene
is changed either manually or from an external MIDI
device. This function is called “Recall Safe.”
For example, this is convenient if you are performing a
mixdown while switching scenes, but want to control
specific channels manually.
1
In the data entry/control section, repeatedly
press the [SCENE] key or hold down the
[SCENE] key and use the CURSOR [ ]/[ ]
keys to access the RCL SAFE page of the
SCENE screen.
1 FADER RECALL SAFE
Here you can select the fader(s) for which recall
safe will be enabled. The fader(s) you select here
will not change even when another scene is
recalled. These buttons correspond to the faders as
follows.
PAD 1–4..................... Pad channel 1–4 faders
INPUT 1–8.................Input channel 1–8 faders
TRACK 1–8,
9-10–15-16 ................Track channel 1–8 and 9/10–15/16
faders
B ENABLE/DISABLE button
This button switches Fader Recall Safe between
ENABLE and DISABLE states. Move the cursor to
this button and press the [ENTER] key to switch the
display between ENABLE and DISABLE.
C CH RECALL SAFE
Selects the channel(s) for which Recall Safe will be
enabled. Mix parameters of the selected channel(s)
will not change even when another scene is
recalled. The buttons correspond to the following
channels.
PAD............................All pad channels
INPUT........................All input channels
TRACK .......................All track channels
RTN............................Return channels 1/2
ST OUT......................Stereo output channel
2
Select the fader(s) or channel(s) that you
want to set to Recall Safe, and turn the corre-
sponding button(s) on (highlighted).
3
If you selected a fader in step 2, move the
cursor to the ENABLE/DISABLE button and
press the [ENTER] key to switch the display to
ENABLE.
Fader or channel Recall Safe has now been
enabled. The selected fader(s) and/or channel(s) will
not be affected by scene recall operations until you
change this setting.
Tip!
Tip!
The settings of the RCL SAFE page are shared by all
songs.
1 32