Yamaha CLP - 880PE Musical Instrument User Manual


 
27
CLP-880/860/840/820/820S
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
Clavinova extraordinary versatility. The functions are categorized in groups as
follows:
CLP-840/
CLP-880/
820/820S 860
F1 F1 Tuning ............................................................. 28
F2 F2 Scale ............................................................... 28
F3 F3 Dual Mode Functions .................................... 29
F4 Split Mode Functions .................................... 30
F4 Left Pedal Mode ............................................. 32
F5 Pedal Functions ............................................. 32
F5 F6 Metronome Volume........................................ 33
F6 F7 Piano Song Part Cancel Volume .................. 33
F7 F8 MIDI Functions ............................................... 34
F8 F9 Backup Functions.......................................... 37
To Select a Function ...........................................................................
ZPress the [FUNCTION] button so that its indicator lights.
NOTE
Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
XUse the FUNCTION [<] and [>] buttons to select the desired
function: F1 through F8 on the CLP-840/820/820S; F1 through F9
on the CLP-880/860.
CIn the case of the Scale (F2), Dual Mode (F3), Split Mode (F4:
CLP-880/860), Pedal Functions (F5: CLP-880/860), MIDI (F7:
CLP-840/820/820S, F8: CLP-880/860), and Backup (F8: CLP-840/
820/820S, F9: CLP-880/860) functions, you will have to press the
[+/YES] button once to enter the respective sub-mode after the
function has been selected, and then use the FUNCTION [<] and
[>] buttons again to select the desired sub-function.
NOTE
The Dual or Split (CLP-880/860) mode must be engaged before the F3
and F4 functions can be selected, respectively. If the corresponding mode
is not engaged,
F3.-
or
F4.-
will appear on the display and the
corresponding sub-mode will not be available.
The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode (CLP-880/860) can
be engaged.
VSet the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
NOTE
After selecting the function, the current setting will be displayed when the
[/NO] or [+/YES] button is pressed for the first time.
BPress the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
Operation Example
(sub-mode)
Press [+/YES]
Use FUNCTION [<], [>]
Use [/NO], [+/YES]
Press [/NO] or [+/YES]
once
FUNCTION
TEMPO
FUNCTION