Yamaha CLP - 880PE Musical Instrument User Manual


 
39
CLP-880/860/840/820/820S
Connecting to an IBM-PC/AT Series Computer............
Connect the TO HOST connector of the Clavinova to the RS-232C port
on your IBM computer, using a standard 8-pin MINI DIN 9-pin D-SUB
cross cable. Set the HOST SELECT switch to the “PC-2” position.
Refer to your software owner’s manual for information on any
settings you might have to make on the computer side.
Connecting to a Personal Computer
HOST SELECT TO HOST
PC-2 PC-1
Mac
MIDI
IBM-PC/AT
Series Computer
Set to the PC-2
position.
PC-2 Cable Connections
8 (CTS)1
7 (RST)2
2 (RxD)3
4 5 (GND)
8
3 (TxD) 5
MINI DIN
8-PIN
D-SUB
9-PIN
8-pin mini DIN
9-pin D-SUB cable.
Data transfer rate: 38,400 bps.
Connector Pin Numbers
1
5
9
4
8
3
7
2
6
1
34
678
5
2
MINI DIN 8-PIN
D-SUB 9-PIN
Trademarks
Apple and Macintosh are trademarks of Apple Computer, Inc.
IBM-PC/AT is a trademark of International Business Machines Corporation.
Windows is the registered trademark of Microsoft® Corporation.
All other trademarks are the property of their respective holders.
NOTE
If your system doesnt work properly with the connections and settings listed above, your software may require
different settings. Check your software operation manual and if it requires a 31,250 bps. data transfer rate, set the
HOST SELECT switch to PC-1.
When using the TO HOST terminal to connect to a personal computer using Windows, a Yamaha MIDI driver must
be installed in the personal computer. The Yamaha MIDI driver can be obtained at Yamahas home page on the
World Wide Web, <http://www.yamaha.co.jp/english/xg/>.