Filter
Top Products
90 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
You can change the Voice and adjust panning and volume for each keyboard part,
Style channel or Song channel.
1 Same operation as in the “Basic Procedure” on page 88. In step
2, select VOL/VOICE tab.
2 Press the [C] (or [H]) button to select the VOICE parameter.
3 Press one of the [1 ▲▼] – [8 ▲▼] buttons to select the desired
part.
The Voice Selection display appears.
4 Select a Voice.
Press one of the Voice category selection buttons on the panel, then select a
Voice by using the [A] – [J] buttons (page 37).
5 Press the [EXIT] button to return to the MIXING CONSOLE
display.
6 Save your settings (step 5 on page 89).
Changing Voices and Adjusting Panning/Volume for Each Part
Changing the Voice for each part
3
NOTE
• Some Voices (such as Organ
Flutes) cannot be selected for Style
channels.
• The RHY2 channel in the STYLE
PART display can only be assigned
Drum kit Voices and SFX kit
Voices.
• When playing GM Song data, chan-
nel 10 can only be used for a Drum
kit Voice.