Filter
Top Products
46 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
The instrument uses advanced digital technology to recreate the legendary sound of
vintage organs. Just as on a traditional organ, you can create your own sound by
increasing and decreasing the levels of the flute footages.
1 Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2 Use the [1 ▲▼] – [8 ▲▼] buttons to adjust the footage settings.
The footage settings determine the basic sound of the organ flutes.
The [1 ▲▼] buttons control two footages: 16' and 5 1/3'. Pressing the [D]
button switches between these two footages.
If you want, you can select the Organ type, change the Rotary Speaker speed
and adjust the Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
Creating Your Original Organ Flutes Voices
NOTE
The term “footage” is a reference to
the sound generation of traditional
pipe organs, in which the sound is
produced by pipes of different lengths
(in feet).
3
4
5
2
1
NOTE
About the VOLUME/ATTACK Page
and EFFECT/EQ Page, see the Refer-
ence Manual on the website.
1 [A]/[B] ORGAN TYPE Specifies the type of organ tone generation to be
simulated: Sine or Vintage.
2 [C] ROTARY SP
SPEED
Alternately switches between the slow and fast
rotary speaker speeds when a rotary speaker effect
is selected for the Organ Flutes (DSP TYPE
parameter in the EFFECT/EQ Page), and the DSP
is turned on (page 44).
3 [F] VIBRATO OFF Alternately turns the vibrato effect for the Organ
Flutes Voice ON or OFF.
[G] VIBRATO ON
4 [H] VIBRATO
DEPTH
Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
5 [I] PRESETS Opens the File Selection display of the Organ
Flute Voices for selecting a preset Organ Flutes
Voice.