Filter
Top Products
Setting Up
DGX-505/305 Owner’s Manual 13
Turn down the volume by turning the [MASTER VOL-
UME] control to the left and press the [STANDBY/ON]
switch to turn on the power. Pressing the switch again
turns the power off.
Backup data in the flash memory (page 49) is loaded to
the instrument when the power is turned on. If no
backup data exists on flash memory, all instrument set-
tings are restored to the initial factory defaults when the
power is turned on.
Turn on the power
• Even when the switch is in the “STANDBY” position, electricity is
still flowing to the instrument at the minimum level. When you are
not using the instrument for a long time, make sure you unplug the
AC power adaptor from the wall AC outlet, and/or remove the bat-
teries from the instrument.
CAUTION
•Never attempt to turn off the power during writing, otherwise the
data on the instrument may be damaged or lost.
CAUTION
● Music Rest
Insert the music rest
into the slots as shown.