Filter
Top Products
Adjusting the EQ 63
01V—Owner’s Manual
Adjusting the EQ
EQ can be adjusted using the SELECTED CHANNEL controls, the quickest method, or
the EQ pages in conjunction with the cursor buttons, [–/DEC] and [+/INC] buttons,
and PARAMETER wheel.
For Input Channels 1–16
1. Use [SEL] buttons 1 through 16 to select channels.
2. Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ
bands, and the F and G controls to adjust the frequency and gain, respec-
tively.
If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer-
ences” on page 203), the EQ page shown below appears, and the Home fader mode is
selected. This page can also be located using the [EQ/ATT] button.
The EQ can also be adjusted on this page by using the cursor buttons to select param-
eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.
For Input Channels 17–24
1. Press the [OPTION I/O] button.
2. Use [SEL] buttons 17 through 24 to select channels.
3. Use the [HIGH] and [LOW] buttons to select EQ bands, and the F and G
controls to adjust the frequency and gain, respectively.
If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer-
ences” on page 203), the OPTION page shown below appears. This page can also be
located using the [OPTION I/O] button.
EQ
HIGH
SELECTED CHANNEL
HI-MID
LO-MID
LOW
PAN
F
G
For quick EQ'ing select
a channel and use the
EQ controls.