Yamaha EX7 Electronic Keyboard User Manual


 
106
Voice Mode
3 InsEF1 (Insertion Effect 1)
Selects the type of effect for Insertion Effect 1.
Settings: 00 (thru)~24
For more information about each type of effect, see the
Effect Type List in the separate Data List book.
4 InsEF2 (Insertion Effect 2)
Selects the type of effect for Insertion Effect 2.
Settings: 00 (thru)~79
For more information about each type of effect, see the
Effect Type List in the separate Data List book.
5 Rev Send (Reverb Send)
Sets the send level of the signal output from
Insertion Effect 1/2 (or by-passed) and sent to the
Reverb unit.
Settings: 0~127
6 Cho Send (Chorus Send)
Sets the send level of the signal output from the
Insertion Effect 1/2 (or by-passed) and sent to the
Chorus unit.
Settings: 0~127
7 Rev (Reverb)
Selects the type of reverb for the Reverb unit.
Settings: 00 (off)~12
For more information about each type of Reverb, see the
Effect Type List in the separate Data List book.
8 Cho (Chorus)
Selects the type of chorus for the Chorus unit.
Settings: 00 (off)~17
For more information about each type of Chorus, see
the Effect Type List in the separate Data List book.
9 ChoRev (ChorusReverb)
Sets the send level of the signal output from the
Chorus unit and sent to the Reverb unit.
Settings: 0~127
) Rev Pan (Reverb Pan)
Sets the panning of the signal output from the
Reverb unit.
Settings: L64 (far left)~cnt (center)~R63 (far right)
! Cho Pan (Chorus Pan)
Sets the panning of the signal output from the
Chorus unit.
Settings: L64 (far left)~cnt (center)~R63 (far right)
@ Rev Return (Reverb Return)
Sets the return level of the signal output from the
Reverb unit.
Settings: 0~127
# Cho Return (Chorus Return)
Sets the return level of the signal output from the
Chorus unit.
Settings: 0~127
[F5]: INS1 (Insertion 1)
Sets various parameters for the currently selected
Insertion 1 effect.
Settings: (The number of parameters and values available
differs depending on the currently selected effect
type. For more information, see the Effect
Parameter List in the separate Data List book.)
[F6]: INS2 (Insertion 2)
Sets various parameters for the currently selected
Insertion 2 effect.
Settings: (The number of parameters and values available
differs depending on the currently selected effect
type. For more information, see the Effect
Parameter List in the separate Data List book.)
Currently selected effect type
Currently selected effect type
Voice/E.qx 5/21/98 11:30 AM Page 106