Filter
Top Products
196
Song Mode
Real Time Recording: Tr1~Tr16
Real Time recording is just like a multi-track recorder
where you record the performance as it is. There are
three types of recording methods, Over Dubbing
(recording over original data but not erasing it),
Replace (erasing and replacing the original data),
Punch In (record for a designated length of measures).
Also there is Multi mode, that when set to “on” (lets
you record on all the tracks simultaneously) and when
set to “off” (lets you recording one track at a time).
1When in Song Play mode, press [REC] to enter Song
Record mode (record stand-by status).
2Set the parameters necessary for recording, such as
the time signature, tempo, and metronome (Click), in
the SONG screen (see page 194).
If necessary, set the Play Effects for each track in the
PFX screen.
3Set the beginning measure number for recording
with the Meas parameter.
4Select the track (Tr1-16) for recording with the
Track parameter.
5Select either the keyboard performance or Arpeggio
with the Src parameter.
6Select one of the following recording modes: [F6]
(Over Dubbing), [F7] (Replace), [F8] (Punch In). To
record on all the tracks simultaneously, press
[F4](MULTI), Multi mode is turned on and
highlighted.
If you select Punch In, designate the beginning and end
measures for recording (see page 195).
7Press [PLAY] and recording will begin after a two
measure countdown. The [PLAY] green light will
blink in sync with the metronome (Click).
During the two measure countdown, Meas (measure)
will display the countdown from –2 to –1.
When in the Punch In recording, playback will proceed
as usual until the designated beginning measure is
reached, at that measure until the end measure, the data
will be recorded over (the original data is written over
and erased). When the end measure is reached, the
Punch In record function is cancelled, and playback
continues if there is recorded data past that point.
8Press [STOP] to stop recording and the EX5/5R/7
automatically returns to Song Play mode.
After you have finished recording, there are various edit
functions that let you correct misplayed notes or the
timing, in the Song Edit mode (page 206) and the Song
Job mode (page 201).
When the power is turned off, the song data is lost.
Please remember that important song data should be
saved to floppy disk or other optional backup device
(page 259).
Real Time Recording: Pattern
The Pattern real time recording function lets you take
patterns from the previously made 50 types of patterns
in the Pattern Record mode, and record them onto the
Pattern track. Select the pattern that best suits the song
performance and record onto the track. There are the
following two types of recording modes available:
Replace, Punch In. Multi mode and Over Dubbing
recording cannot be used.
1When in Song Play mode, press [REC] to enter Song
Record mode.
2Set the parameters necessary for recording, such as
the time signature, tempo, and metronome (Click), in
the SONG screen (see page 194).
3Set the beginning measure number for recording
with the Meas parameter.
4Select the Pattern track for recording with the Track
parameter.
5Press either [F7](Replace), or [F8](Punch In), to
select the recording mode.
If you select Punch In, designate the beginning and end
measures for recording (see page 195).
6Select the first pattern number to be recorded with
Ptn No parameter.
7Press [PLAY] and recording will begin after a two
measure countdown. The [PLAY] green light will
blink in sync with the metronome click.
During the two measure countdown, Meas (measure)
will display the countdown from –2 to –1.
Song/E/qx 5/21/98 11:41 AM Page 196