Filter
Top Products
Pattern Mode
231
8. Time Stretch
This job expands or compresses the timing over the
designated range on the specified track. The operation
affects all note step times, gate times, and event timing,
expanding or compressing the entire designated range.
■ Track
Sets the track where Time Stretch is executed.
❏ Settings: 1~8, all
■ Measure
Sets the measure range (beginning measure to the
end measure) where Time Stretch is executed.
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Time
Sets the ratio in percentages of the expansion or
compression in the designated range.
❏ Settings: 50~200%
[F3]: JOB2
Press [F3] (JOB2) and JOB2 menu will be displayed.
There are eight jobs that are executed in measure units.
1. Copy Measure (Copies data in the designated range.)
2. Erase Measure (Erases data in the designated range.)
3. Get Phrase (Borrows sequence data from a song track.)
4. Put Phrase (Copies a pattern track data into song
sequence track.)
5. Thin Out (Reduces data such as controller data.)
6. Extract (Extracts specific data from the designated
range.)
7. Chord Sort (Sorts chordal note events, by pitch, over a
designated range of a track.)
8. Chord Separate (Arranges chord notes in order with a
specified interval.)
1. Copy Measure
This job copies all data from a specified range on a
track onto another. It is also possible to copy data
within the same track. This operation overwrites any
data already existing on the destination track.
■ Src Track (Source Track)
Sets the source track that will be copied.
❏ Settings: 1~8, all
■ Src Meas (Source Measure)
Sets the range (the beginning measure and the end
measure) in the source track.
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Dst Track (Destination Track)
Sets the destination track that will be copied to.
❏ Settings: 1~8, all
■ Dst Meas (Destination Measure)
Sets the first destination measure (the measure
where copying will begin) that will be copied to.
❏ Settings: 01~16
■ Times
Sets the number of times copy will take place.
❏ Settings: 1~16
2. Erase Measure
This job erases all data from a specified range on a
track. Even though the data is erased the empty
measures still remain.
■ Track
Sets the track where Erase Measure will be executed.
❏ Settings: 1~8, all
Pattern/E/qx 5/21/98 11:43 AM Page 231