Yamaha EX7 Electronic Keyboard User Manual


 
Disk Mode
266
Synth All source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A performance/voice file (128
Performances and 256 Voices) can be loaded. Move
the cursor to “All Data” and use [INC]/[DEC] to
select “Performance” (128 Performances) or “Voice”
(256 Voices). Furthermore, one performance/voice
can be designated and loaded. In this case, only a
specified performance/voice number will be replaced
with the newly loaded data.
Synth All destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
Settings:
In an All Data, System data is included.
[F3]: VCE (Voice)
Loads a “Voice” file from the disk into the internal
memory. You can load all of the voices or only a
specified voice at a time.
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
Source data (From):
All Data
Performance & Voice
Performance All
001~128
Voice All
Bank I1~I2 (001~128)
Destination (To):
All Data
Performance & Voice
Performance All
001~128
Voice All
Bank I1~I2 (001~128)
Voice source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A Voice file (256 Voices) can be
loaded. Furthermore, one voice can be designated
and loaded. In this case, only a specified voice
number will be replaced with the newly loaded data.
Voice destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
Settings:
[F4]: WAVE
Loads a wave file from the disk into the internal
memory. You can load all of the wave data or only a
specified wave at a time.
Sample source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. All wave data can be loaded at a
time. Furthermore, one wave can be designated and
loaded. In this case, only a specified wave number
will be replaced with the newly loaded data.
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
Source data (From):
All Data
Voice Bank I1~I2 (001~128)
Destination (To):
All Data
Voice Bank I1~I2 (001~128)
Disk/E/qx 5/21/98 11:53 AM Page 266