Filter
Top Products
ENGLISH
Recording Your Performance
F11/F01 Owner’s Manual
39
4 Start recording.
Recording will begin automatically as soon as you play a note on the keyboard
or press the [PLAY/STOP] button.
The current measure number will appear on the display while recording
and the right-most dot on the LED display will flash at the current metro-
nome tempo setting.
5 Stop recording.
Press either the [REC] or [PLAY/STOP] button to stop recording.
When the recording is finished, the “End” appears on the display for three
seconds.
6 Play back the recorded performance.
Refer to “Playing Back Recorded Songs” on page 40.
TIP
If the metronome was on when
you started recording, you’ll be
able to keep time with the met-
ronome while recording, but the
metronome sound will not be
recorded.
NOTE
On the F01, the [PLAY/STOP]
and [REC] button indicators will
begin to flash when the recorder
memory is almost full. If the
memory becomes full during
recording, “FUL” will appear on
the display and recording will
stop automatically. (All recorded
data up to that point will be
retained.)
NOTE
Pressing the [PLAY/STOP] but-
ton to start recording, then
pressing it again to stop record-
ing will erase previously
recorded data
NOTE
You cannot re-record in the mid-
dle of a song.
The user song recorder records the following data:
•Notes played
•Voice selection
•[VARIATION] ON/OFF
•Pedal (Damper/Soft/Sostenuto)
•Reverb Type (including OFF)
•Reverb Depth
•Tempo
•Time signature (beat)
•Dual mode voices
•Dual balance
•Dual Octave Shift
•Dual Reverb Type
• Split mode voices
• Split balance
• Split Octave Shift
• Split Reverb Type
flash flash flash