Filter
Top Products
ENGLISH
Connections
F11/F01 Owner’s Manual
51
Connections
Connectors
CAUTION
Before connecting the F11/F01 to other electronic components, turn off the power to all the components. Before turning
the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the
components may result.
1 AUX OUT[L/L+R][R] jacks
You can connect these jacks to a stereo system to amplify the F11/F01 or to a cas-
sette tape recorder to record your performance. Refer to the diagram below and use
audio cables to make the connections.
CAUTION
When the F11/F01’s AUX OUT jacks are connected to an external audio system, first
turn on the power to the F11/F01, then to the external audio system. Reverse this order
when you turn the power off.
2 AUX IN[L/L+R][R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the F11/F01’s
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
R
AUX INAUX OUT
L L RR L L R
MIDI USB
OUT
IN TO DEVICE
LAN
12
34
5
(F11)
NOTE
Use audio cables and adaptor
plugs with no resistance.
NOTE
When the sound from the AUX
OUT jacks is routed to the AUX
IN jacks, the input sound will be
output from the speaker of the
F11/F01. The output sound may
be excessively loud and may
cause noise.
NOTE
Use only the AUX OUT [L/L+R]
jacks for connection with a
mono device.
AUX OUT
R L L R
Digital Piano Stereo
AUX OUT AUX IN
phone plug
(standard)
phone plug
(standard)
audio cable
NOTE
The F11/F01’s [VOLUME] con-
trol setting affects the input sig-
nal from the AUX IN jacks, but
the [REVERB] setting does not.
NOTE
Use only the AUX IN [L/L+R]
jack for connection with a mono
device.