Filter
Top Products
F11/F01 Owner’s Manual
56
ENGLISH
Data Backup (F11)
2 Start backup.
Press the [START] button.
The “n
–
y” prompt will appear on the display if the USB flash memory device
contains a file with the same name as the one you are attempting to backup.
Press the [+/YES] button to execute the overwrite operation. Press the [–/NO]
button to cancel backup. When the backup is finished, an “End” message
appears on the display.
3 Exit from the Backup mode.
Press the [–/NO] or [+/YES] button.
Restoring the Backup Data
The backup data in a USB flash memory device can be restored to the instrument.
1 Engage the Backup mode.
Make sure that the USB flash memory device containing the restore data
"F11.bup" is connected to the instrument, then press the [REC] button while
holding the [VARIATION] button.
2 Enable the Restore mode.
Press the [+/YES] button.
CAUTION
To cancel restore, press any button (except [PLAY/STOP], [–/NO], or [+/YES]) before
pressing the [PLAY/STOP] button in step 3.
3 Start the restore operation.
Press the [START] button.
When the restore operation is finished, an “End” message appears on the dis-
play.
4 Exit from the Restore mode.
Press the [–/NO] or [+/YES] button.
NOTE
The backup data file is automat-
ically named "F11.bup."
Operation