Filter
Top Products
39
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
English
Display Messages
Messages Page
Can’t find the i88X (or mLAN16E) on the mLAN network.
Make sure that the i88X (or mLAN16E) is turned on and that the mLAN cable connec-
tion is correct and secure. After that, restart “mLAN Auto Connector”.
19, 33
The settings of the mLAN Driver could not be changed.
1) If an application that uses the driver is currently active, close it first, then change
the settings.
2) There is not enough resource memory.
24
Failed to initialize the mLAN settings because the application “mLAN Start” is not run-
ning.
Select “ON” from the menu of “mLAN Manager” application.
14
Can’t connect the i88X (or mLAN16E)’s mLAN audio output plug to the computer’s
mLAN audio input plug.
14, 19,
33
Can’t connect the i88X (or mLAN16E)’s mLAN MIDI output plug to the computer’s
mLAN MIDI input plug.
14, 19,
33
Can’t connect the computer’s mLAN MIDI output plug to the i88X (or mLAN16E)’s
mLAN MIDI input plug.
14, 19,
33
Can’t connect the computer’s mLAN wordclock output plug to the i88X (or
mLAN16E)’s mLAN wordclock input plug.
14, 19,
33
Can’t connect the i88X (or mLAN16E)’s mLAN wordclock output plug to the compu-
ter’s mLAN wordclock input plug.
14, 19,
33
A new 1394 adaptor card has been found.
If you’ve inserted a new card, restart the computer.
There is not enough resource memory.
Execute mLAN Stop, then execute mLAN Start again. If this fails, restart the computer.
14
The 1394 adaptor card has not been found.
Check the card and start mLAN again.
14
One of the programs could not be started. Follow the instructions/messages in the
appropriate application. If there are no messages, execute mLAN Start again or restart
the computer.
14
The application is not responding.
Execute mLAN Start again or restart the computer.
14
Failed to load the mLAN Bus Driver.
If the New Hardware Wizard has not been run, use it to install the hardware, then exe-
cute mLAN Start.
14
One or more programs could not be closed.
After quitting all DAW programs and any programs using mLAN, execute mLAN Stop.
14