Yamaha KX25 Electronic Keyboard User Manual


 
Utility Settings
Owner’s Manual
37
Restoring the Factory-programmed System Settings
(Factory Set)
You can restore the factory default settings of the KX. Follow the instructions below to execute Factory Set.
CAUTION
The edited Arpeggio types and Control Templates will be lost by executing Factory Set. Important data should be
saved to the computer by using the KX Editor (page 6).
1.
From the Top display, press the [UTILITY]
button (the lamp lights).
2.
Use the SELECT buttons to call up
“FactorySet.”
3.
Press the DATA [INC] button.
“Are you sure?” appears on the display.
4.
Press the DATA [INC] button again to
execute Factory Set.
After Factory Set has been completed, the
display called up in step 2 appears.
DAW Select
CubaseAI, Cubase4,
LogicPro, DigiPerf,
SONAR
CubaseAI
Determines the DAW software you use on the computer with the
KX.
ProgChgMode
PC+Remot, ProgChg,
Remote
PC+Remot
Determines the type of the MIDI message generated by pressing
the PROGRAM [INC] and [DEC] buttons.
PC+Remot
. When this is selected, the Program Change message
is transmitted via USB-MIDI Port 1 and the Remote
Control message dedicated to Cubase is transmitted
via USB-MIDI Port 2.
ProgChg.. When this is selected, only the Program Change
message is transmitted via USB-MIDI Port 1.
Remote.... When this is selected, only the Remote Control
message dedicated to Cubase is transmitted via USB-
MIDI Port 2.
MIDI Select USB, MIDI USB
Determines which connector is used for MIDI transmit/receive:
USB TO HOST or MIDI IN/OUT.
USB......... The USB TO HOST connector is used for MIDI
communication between the computer and the KX.
When the MIDI Thru parameter below is set to “MIDI
MIDI” or “MIDI USB” or “USB MIDI,” MIDI can
also be transmitted via the MIDI OUT connector (MIDI
Thru only), even if “USB” is selected here.
MIDI......... Only the MIDI connectors are available for MIDI
communication.
MIDI Transmit Ch 1–16 1
Determines the MIDI channel over which the KX transmits MIDI
messages (generated via your keyboard performance).
MIDI In Thru
Off, MIDIMIDI,
MIDIUSB, USBMIDI
MIDIUSB
Determines whether the MIDI messages received via the MIDI IN
connector will be transmitted via the MIDI OUT connector or USB
connector.
Device Number Off, 1–16, All All Determines the MIDI Device Number of the KX.
Display Time
Off, 1.0sec, 1.5sec,
2.0sec, 3.0sec, 4.0sec,
5.0sec, Hold
1.5sec
Determines the duration (time) for which the value (like the one
called up by operating the CONTROL knob) is shown temporarily
on the display.
Octave LED Normal, Reverse Normal
Determines the status of OCTAVE LED lamps. When “Normal” is
selected, the LED lamps work as described on page 27. When
“Reverse” is selected, the right and left of the LED status are
reversed.
BulkTransmit
Transmits all the settings of the KX to the DAW software or
external MIDI device as bulk data. Press the DATA [INC] button to
start transmission.
FactorySet Restores the factory-programmed system settings of the KX.
Display Range
Initial
Value
Description