Yamaha EX5 Electronic Keyboard User Manual


 
188
Song Mode
Tr (Track Number)
Indicates the currently selected track number
(1~16). Select the track that will be affected by the
Play Effects.
Settings: Tr1~16
TRACK [1~16] keys on the panel can also be used to
select a track number (EX5/7 only).
When ALL is selected with [F5], whichever track you
select here, the Play Effects settings will be the same for
all tracks.
Groove
You can select a groove template of your choice and set
parameters for each groove template.
Val (Quantize value)
Indicates the Quantize value for each track. The
Quantize value sets the basic note that each groove
template uses to correct the timing. You can change
this value only when User groove template is
selected.
Settings: off, , , , , , , , ,
Type
Displays and sets the Template Type for each track.
To apply various grooves, select a template from the
100 Preset groove templates, or from your own User
groove templates (see page 190). When you don’t use
a template, set to 000 (off).
Settings: 000 (off), 001~100, 101 (usr)
For more information about Preset groove templates,
see the Groove Template List in the separate Data List
book.
Str (Quantize Strength)
Sets the degree how much the timing of the song
data is moved toward the grid position (page 191)
predetermined in the groove template. As shown in
the diagram, when set to 100% the timing is exactly
moved to the grid position set in the groove template.
When 0% is set, the song data is not affected at all.
Settings: 0~100%
Original Data
Quantize by “
Quantize Strength = 100%
Quantize Strength = 50%
Tim (Timing)
Sets the degree of the Clock Shift (page 189) value,
predetermined in the groove template, to be added to
the timing of the song data. When set to 100%, the
Clock Shift is calculated as is. When set to 0%, the
Clock Shift becomes 0 and the timing of the original
data does not change. When set above 100%, the
Clock Shift value exceeds its original value.
Settings: 0%~100%~200%
Vel (Velocity)
Sets the degree of the Velocity Offset (page 189)
value, predetermined in the groove template, to be
added to the velocity of the song data. When set to
100%, the Velocity Offset that was set by the
template is calculated as is. When set to 0%, the
Velocity Offset becomes 0 and the velocity of the
original data does not change. When set above
100%, the Velocity Offset value exceeds its original
value.
Settings: 0%~100%~200%
If the value set here designates the velocity value below
“1,” the value will be replaced with “1.”
If the value set here designates the velocity value above
127, the value will be replaced with “127.”
Gat (Gate Time)
Sets the degree of the Gate Time Rate (page 190)
value, predetermined in the groove template, to be
added to the gate time (Gate Time is the length of
notes) of the song data. When set to 100%, the gate
time of the song data will follow to change according
to the predetermined Gate Time Rate. When set to
0%, the gate time of the original data does not
change. When set above 100%, the gate time changes
larger than the Gate Time Rate setting.
Settings: 0%~100%~200%
If the value set here designates the gate time value
below “1,” the value will be replaced with “1.”
Offset
Sets the offset values of the Clock Shift and Velocity for
each track.
Song/E/qx 5/21/98 11:40 AM Page 188