Yamaha EX5 Electronic Keyboard User Manual


 
Pattern Mode
219
Pattern Mode
Remaining Memory
This bar graph indicates the amount of memory
available for recording, or the remaining memory of
the internal sequencer. This is common for all the
internal sequencer functions, Song, Pattern and
Arpeggio.
Measure/PTN (Pattern Name)
The pattern number/name and the current measure
number will be displayed. These items cannot be
modified.
Track Section
These settings are used to set the Mute and Play Effects
Thru to “on” or “off” for each track even during
pattern playback.
1 Track Number
One pattern consists of 1~8 sequence tracks. The
Track Number is highlighted (box colored black) for
tracks that have been recorded on and contain data.
2 Mute
Sets Mute for a track, by moving the cursor to the
Mute line, and using Data Dial or [INC]/[DEC] to
select “on” or “off.” As shown in the screen, the box
colored black indicates that Mute is turned “on.”
When Mute is turned “on,” that track is muted
during playback, and the sound is temporarily
suspended. When Mute is turned “off,” only the
outline of the box is displayed, Mute is canceled, and
sound will once again be produced.
1
2
3
5
7
4
9
)
86
Pattern Play Mode
This mode uses the internal sequencer to play patterns
and has various functions related to playing patterns.
You can enter Pattern Record mode from Pattern Play
mode and record patterns, a maximum of 50. These
patterns can be used to create a song. For organizing
your patterns after they have been recorded, store them
on floppy disk so that you can make use of them
whenever you like.
Patterns are configured with several tracks up to 16
measures and always play back in a loop (repeatedly).
For more information about the sequencer, see page 60.
Press [PATTERN] key on the panel to enter Pattern
Play mode. When you enter the Pattern Play mode, the
following menu screen will be displayed. In the Pattern
Play mode there are four types of menus.
[F1]: PTN (Settings related to playing patterns)
[F2]: PFX (Settings related to Play Effects)
[F3]: TCH (Settings related to the track transmit
channels)
[F4]: NAME (Settings related to naming patterns)
You cannot enter Pattern mode when [ARPEGGIO] key or
[KEYMAP] key is turned on.
[F1]: PTN (Pattern)
These parameters are used to set the Mute and Play
Effects Thru functions for each pattern track (1-8
tracks). They can be set to “on” or “off.” There are also
settings related to playing patterns such as Tempo.
Pattern Number/NameMeasureRemaining Memory
F1 F2 F3 F4
Pattern/E/qx 5/21/98 11:43 AM Page 219