Filter
Top Products
225
Pattern Mode
5Select the track (Tr1-8) for recording with the Track
parameter.
6Select one of the following recording modes: [F6]
(Over Dubbing) or [F7] (Replace). To record on all
the tracks simultaneously, press [F3] (MULTI), Multi
mode is turned on and highlighted.
7Press [PLAY] and recording will begin after a two
measure countdown. Record something by playing
the keyboard. The [PLAY] green light will blink in
sync with the metronome click.
During the two measure countdown, Meas (measure)
will display the countdown from –2 to –1.
8Press [STOP] to stop recording, the EX automatically
returns to the Pattern Play mode.
When you start realtime recording [F8] (DEL: Delete)
will be added to the screen. In the middle of realtime
recording you can delete an unnecessary sound by
pressing the appropriate key while holding down [F8]
(DEL). This is effective for the notes appeared during
the delete operation.
After you have finished recording, there are various edit
functions that let you correct misplayed notes or the
timing in the Pattern Edit mode (page 226) and the
Pattern Job mode (page 227).
Step Recording
In Step recording the performance data (note length,
pitch, and velocity) is programmed one note at a time.
Step Recording Screen
When in Step Recording (after you press [PLAY]), the
following screen will be displayed.
All of these functions are the same as those explained
in STEP recording of the Song Record mode. For more
information about each parameter and the ways to
input notes, see page 198.
The Procedure for Step Recording
1When in the PTN display of Pattern Play mode,
select a pattern number (01-50) to record.
2In the PFX display of Pattern Play mode, set the
Length (loop length) for each track (1-8).
3When in Pattern Play mode, press [REC] to enter
Pattern Record mode (record stand-by status).
4Set the time signature for recording in the PTN
display.
5Set the beginning measure number for recording
with the Meas parameter.
6Select the track (Tr1-8) for recording with the
Track parameter.
7Press [F5] (STEP) to select the Step recording
mode.
8Press [PLAY], the [PLAY] green light will be lit,
and the Step Recording screen will be displayed.
9Set the note length and the velocity, and input
the note with the keyboard. The ↓ cursor
automatically moves forward a distance equal to
the length of the note that was just input.
)Repeat step 9 above, and program in one note at
a time.
!Press [STOP] to stop recording. The EX
automatically returns to Pattern Play mode.
After you have finished recording, there are various
edit functions in Pattern Edit mode (page 226) and
Pattern Job mode (page 227).
Pattern/E/qx-3 11/6/98 6:47 PM Page 225