Filter
Top Products
99
Voice Mode
■ Decay Level Vel (Decay Level Velocity)
Increase or decrease the Decay Level with the
velocity.
❏ Settings: –7~0~+7
■ Attack Mode
Selects the Attack Mode (1 or 2) or switches back
and forth between modes.
❏ Settings: 1 (Attack Mode 1), 2 (Attack Mode 2)
More information about each mode is provided below.
■ Release Mode
Selects the Release Mode (1 or 2) or switches back
and forth between modes. When Release mode 2 is
selected, Release Time 2 and Release Level 2 (set at
“0”) are added and an even more complex envelope
curve can be created.
❏ Settings: 1 (Release Mode 1), 2 (Release Mode 2)
■ Attack Time
Sets the Attack Time.
❏ Settings: 0~127
■ Dcy 1~3 Time (Decay 1-3 Time)
Sets the Decay 1-3 Time.
❏ Settings: 0~127
■ Rel (Rel 1/2) Time
Sets the Release Time.
❏ Settings: 0~127
You can set the Release 1/2 Time only when Release
Mode 2 is selected.
■ Init Level (Initial Level)
Sets the Initial level (when in “Hold mode”).
❏ Settings: 0~127
This parameter is effective only when the “Attack mode
1” is selected.
■ Dcy 1~3 Level
Sets the level of Decay 1-3.
❏ Settings: 0~127
■ Rel1 Level
Sets the level of Release 1 (when in Release Mode 2)
❏ Settings: 0~127
Release 1 Level is fixed to “0” in the Release Mode 1.
Release 2 Level is fixed to “0” in the Release Mode 2.
Setting the Amplitude Envelope Generator
There are six Time settings (the speeds of changes)
and seven Level settings that shape how the volume
of the sound changes over time, from when a key is
hit, then released, and how the sound decays.
Press [F8] to select the ENVELOPE screen. Here
each value can be set with the Envelope graphical
display.
There are two types of Attack Modes (1 and 2) for
the AEG. Attack Mode 1 has one attack and Attack
Mode 2 has a two-step attack. Select the Attack
Mode you want to use from the All Parameters
screen.
You can also set the desired values for the Time
Velocity and Time Scaling in the All Parameters
screen.
Attack Mode 1
Initial Level = Attack Level
Attack Mode 2
R1L R2LD1L
Key on
D1T
Key off
D2T
AT D3T R1T R2T
D2L D3L
Time
AL
Output
R1L R2L
AL
Key on
AT
Key off
Intial
Level
(255)
D1T D2T D3T R1T R2T
D1L
D2L
D3L
Time
Output
R1L R2L
AL
Key on
AT
Key off
D1T D2T D3T R1T R2T
D1L
D2L D3L
Time
Output
Voice/E.qx 6/12/98 6:10 PM Page 99