Yamaha S30 Electronic Keyboard User Manual


 
129
Utility Mode
BCCurve (TG Breath Curve)
Set the Breath Curve that defines how the sound is
output according to Breath Controller MIDI
information.
Settings: thru, soft, hard, wide
CTRL (System Controller)
In Voice Mode, you can set parameters for Controllers.
The following four screens are available.
CTRL KnobA (Control Knob [A])
CTRL KnobB (Control Knob [B])
CTRL KnobC (Control Knob [C])
CTRL Other (Control Other)
CTRL Knobs [A] to [C]
You can assign various control functions to Assignable
Knobs [A] to [C] on the front panel.
CTRL KnobA) CC# Dest
Sys 67[--------] EQLow-G
wide
Adjusted Breath Control
Received Breath Control
hard
Adjusted Breath Control
Received Breath Control
soft
Adjusted Breath Control
Received Breath Control
thru
Adjusted Breath Control
Received Breath Control
CC# (Control Number)
Assign MIDI Control Change Numbers to Assignable
Knobs [A] to [C].
Settings: 000 ~ 095 (see the separate Data List for
details)
Dest (Control Destination)
Set the function to be controlled by Assignable
Knobs [A] to [C].
Settings: see the separate Data List for details
The positions of Knobs [A]/[B]/[C] can be memorized
for each Voice, Performance.
If a Master Equalizer parameter is selected as the
destination, the M.EQ settings of “vce” (in Utility
Mode) are increased/decreased Using Knobs
[A]/[B]/[C].
CTRL Other (Controller Other)
Set the Foot Switch parameter.
FS (Foot Switch)
Assign a Control Change message to the Foot Switch.
Settings: 000 ~ 100 (000/032 = off, 096 = Arp Sw, 097
= Arpeggio Hold, 098 = Sequence PLAY/STOP,
099/100 = Program Change INC/DEC)
Details about Control Numbers and Control Changes
are given in the separate Data List.
CTRL Other) FS
Sys 64[Sustain ]