Yamaha S30 Electronic Keyboard User Manual


 
93
Voice Mode
Plug-in Common Edit and Editing Each Element
There are two edit screens for a Plug-in Voice. One is
for general Voice settings called Plug-in Common, and
the other is for element settings called Plug-in
Element. There is only one element available for a
Plug-in Voice, but you can make access to parameters
in Plug-in Common and Element screens, which are
similar to ones for a normal Voice.
In Plug-in Voice editing, you can switch between the
Common and Element screens using the Knob [A].
Menu Display
When you use the [PAGE] knob while holding down
the [SHIFT] key, you will see the following Menu
Display. Then use the [PAGE] knob to move the
cursor to the desired item and release the [SHIFT]
key to jump to the Edit screen for the selected item.
The [PROGRAM/PART] keys on the S30 can directly
select Menus associated to them (page 65).
SHIFT PAGE
PART
/
ELEMENT
DATAA B C 1 2
NTVíPrm1) Com:>GEN≥QED>ARP>CTL>LFO>EFF
Common Elem:>OSC>PCH>EQ >PLG
-
NATIVE
Cursor
VCE*Play) PRE1:128(H16)[Pf:GrandPiano]
+63 EQ Mid EQ Hi Cutoff RevTime
GENíOther) Mode Assign 
Common poly single
OSCíAssign) Bank Number 
Elem NORM/001 128[GndPiano]
Plug-in Common Edit Screens
Plug-in Element Edit Screens
SHIFT PAGE
PART
/
ELEMENT
DATAA B C 1 2
Plug-in Element Indicator
Common Indicator
( )
CTL AT Modulation (AT Modulation Depth) 96
CTL AC Control (AC Control Depth) 96
CTL AC Modulation (AC Modulation Depth) 96
Plug-in Common LFO (Low Frequency Oscillator) 96
LFO Param (LFO Parameter) 96
Plug-in Common Effect 73
EFF InsEF1 (Insertion Effect) 73
EFF Rev (Reverb) 74
EFF Cho (Chorus) 74
Plug-in Element
Plug-in Element OSC (Oscillator) 97
OSC Assign (Oscillator Assign) 97
OSC Velocity (Oscillator Velocity) 97
Plug-in Element Pitch 97
PCH PEG (Pitch Envelope Generator) 98
Plug-in Element EQ (Equalizer) 98
EQ Param (EQ Parameter) 98
Plug-in Element Native 98
PLG-NATIVE (Plug-in Native) 98
Plug-in Voices
The Voices held on Plug-in Board (Single Part) are known
as Board Voices. A Plug-in Voice is a Board Voice that has
been processed in the synthesizer in Voice Edit Mode.
There are six Common Edit screens and four screens for
editing the Element of a Plug-in Voice. You can save up to
64 edited Plug-in Voices in Banks A to D of Memory PLG.
After selecting the Plug-in Voice you wish to edit (in
Banks A to D of Memory PLG), when you enter Voice
Edit Mode, you will see the Voice Edit Mode screen
that you had exited from previously.
Monitoring Board Voices
You can monitor Board Voices without having to
enter Edit Mode. Also, if you press the [EDIT] key
while monitoring, you will enter Edit Mode with
the oscillators of the Board Voice already assigned.
1While holding down the [PLG] key, use Knob [C]
to select the Board Voice’s Bank. “PLG INT” is
the Bank of the Plug-in Voice (Plug-in Internal)
stored in Memory PLG.
2Release the [PLG] key. Select the Board Voice
using the BANK/PROGRAM keys or [DATA]
knob as in the same way to select a Voice from
another memory.
If there is no Voice at the Program Number
corresponding with the selected Bank, no sound will
be produced.
To edit the Board Voices on the Plug-in Board, you need
to use a computer and the included editor software.
Details about Plug-in Voices and Board Voices are
given on Pages 27, 99.
Many parameters are the same as for Normal Voices
(the gray items in the tree diagram). Only those items
that differ are explained here.
Details about the other parameters are given in the Normal
Voice explanation on Page 64.
Plug-in Voices
Plug-in Common
Plug-in Common General 65
GEN Name (General Name) 65
GEN Other (General Other) 94
Plug-in Common Quick Edit 66
QED Level (Quick Edit Level) 66
QED EffectCtrl (Quick Edit Effect) 66
QED Filter (Quick Edit Filter) 67
QED EG (Quick Edit Envelope Generator) 94
Plug-in Common Arpeggio 67
ARP Type (Arpeggio Type) 67
ARP Limit (Arpeggio Note Limit) 68
ARP Mode (Arpeggio Mode) 68
ARP PlayEF (Arpeggio Play Effect) 68
Plug-in Common Controller 95
CTL Pitch (Pitch Bend) 95
CTL Set1 (Control Set 1) 95
CTL Set2 (Control Set 2) 95
CTL MW Control (MW Control Depth) 95
CTL MW Modulation (MW Modulation Depth) 95
CTL AT Control (AT Control Depth) 95