Yamaha VL1 Electronic Keyboard User Manual


 
26
Getting Started
Setting Up
IMPORTANT!
Play the Demo
Once you’ve set up your VL1 system, you might like to play the pre-programmed
demo sequence to hear how some of the voices sound. This process will also help to
familiarize you with some of the VL1’s selection and editing procedures.
IMPORTANT! When you run the demo the VL1 automatically loads the
required voices and system data into the 16 bank-H voices, thus erasing any
previous data in these memory locations. This is the same as the data initially
contained in these memory locations when the VL1 is first shipped, so if you
haven’t made any changes there is no problem. If, however, you have edited the
bank-H data or saved data from another bank or disk to this bank, you may want
to save your data to floppy disk before running the demo.
1. Select the Utility Mode System Page
Press the U button to select the utility mode. Then, if it is not already se-
lected when the utility mode display appears, press the ¡ button to select the “Sys-
tem” function page.
2. Select the Demo Page
Press the button to select the “Demo” page.