Filter
Top Products
10 DGX-630/YPG-635 Owner’s Manual
Setting Up
z The parts shown in the “Assembly Parts” illustration will be used. Follow the assembly
instructions and select the parts as needed.
Keyboard Stand Assembly
Have a phillips-head (+) screwdriver of the appropriate size ready.
Read these cautions carefully before you assemble or use the keyboard stand.
These cautions are to promote safe use of the stand and to prevent injury and damage from occurring to you and oth-
ers. By following these cautions carefully, your keyboard stand will provide you with safe and prolonged use.
• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the
sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.
• Use the stand after assembly is complete. An uncompleted stand may overturn or the keyboard may drop.
•Always place the stand on a flat, stable surface. Placing the stand on uneven surfaces may cause it to become unstable or overturn,
the keyboard to drop, or injury.
• Do not use the stand for anything other than its designed purpose. Placing other objects on the stand may result in the object drop-
ping or the stand overturning.
• Do not apply excessive force to the keyboard as it may cause the stand to overturn or the keyboard to drop.
• Make sure the stand is sturdy and safe, and all screws have been tight and firm before use. If not, the stand may overturn, the key-
board may drop, or may result in injury to the user.
•To disassemble, reverse the assembly sequence given below.
CAUTION
w 6 x 70 mm roundhead
screws (4 pcs.)
q Joint connectors (4 pcs.)
e 6 x 30 mm roundhead
screws (4 pcs.)
y 5 x 16 mm roundhead
screws (4 pcs.)
Assembly Parts
r Support rail
t 4 x 45 mm flathead screws
(6 pcs.)
1
Use the packing sheet to protect both the instrument and
the floor when assembling.
* The sheet is the bag in which the instrument is wrapped.
Back board
Side
boards
Stand
bases