PDS • User’s Guide 135
_K==oÉãçíÉ=`çåíêçä
PDS Command List
map=`çãã~åÇ=iáëí
The table below lists PDS remote commands.
Note
The following commands are for the PDS-902 and PDS-901
units. For a PDS-701 unit, the input parameter range cannot
include inputs 7 or 8.
Table B-3. PDS Remote Commands
Command Description Page
Ethernet Commands
DHCP
Enable/Disable DHCP mode 139
EMAC Get MAC Address 139
GATEWAY Set gateway to be used when DHCP is OFF 140
IP Set Static IP Address to be used when DHCP is OFF 140
SUBNET Set subnet mask to be used when DHCP is OFF 140
Input Commands
BLKVID
Puts black into the program input 141
CBLEQ Set cable equalization 141
EDID Set Input EDID Resolution 141
EDIDTYPE Set EDID type 141
FREEZE Freeze the input on program 142
IADJ Selects the input path to adjust (preview or program) 142
IADJRST Reset the input timing parameters to default values for analog. 142
IAR Adjust Input Aspect Ratio 142
IAUTOACQ Input Source Acquire Mode 143
IAUTOC Attempts to detect and adjust input video to the active video area 143
IAVAIL Query only command for input availability 143
IBRT Input brightness adjust 144
ICDEL Delete Input Configuration 144
ICNT Input contrast adjust 144
ICPHO Input Phase Adjust 144
ICREC Recalls saved input configuration for selected input 145
ICRST Reset Input Configuration to default values 145
ICSAV Saves Input Configuration 145
