8 PDS • User’s Guide
2. Hardware Orientation
PDS Front Panel
map=cêçåí=m~åÉä
The figure below illustrates the PDS front panel:
Figure 2-1. PDS Front Panel
Following are descriptions of each front panel section:
1) Display Section
The Display Section includes a four-line display, the ADJUST knob and two
“menu navigation” buttons: SEL and ESC. Refer to the “Display Section”
heading on page 9 for complete details.
2) Inputs Section
The Inputs Section includes ten “source” buttons that enable you to select inputs
and a full screen LOGO. Refer to the “Inputs Section
” heading on page 10 for
complete details.
3) Effects Section
The Effects Section provides three buttons that enable you to select the type of
effect that you want to perform next. Refer to the “Effects Section” heading on
page 11 for complete details.
4) Take Button
The red TAKE button initiates a transition to the selected source. Refer to the
“Take Button” section on page 12 for details.
5) USB Port
The USB port can be used for upgrading system firmware. Refer to the
“Upgrading Firmware Using the USB Port” section on page 98 for details.
SEL
ESC
Adjust
2
36
1
5
4
SDI
Inputs
LOGO
FRZ BLACK
TAKE
Effects
PDS-701
Main Menu
Input >>
> In Auto Acquire ON
Output >>
1) Display Section 4) Take Button
2) Inputs Section 5) USB Port
3) Effects Section
