70 PDS • User’s Guide
4. Operation
Setup Menu
If the programming is successful, the following message is displayed:
Figure 4-48. Programming EDID Message 2
If the EDID programming failed, the following message will be displayed:
Figure 4-49. EDID Programming Failed Message
If this message persists, please contact customer service for technical support.
• Type (5 to 8) — This field applies to inputs 5 through 8 only, allowing you to select
between Digital or Analog EDID for these inputs. Please note:
~ When the Input field is set to 5 through 8, the Type field is selectable
between ANALOG or DIGITAL, and the current Type is reflected.
Changing this field triggers the programming process as soon as SEL is
pressed, using the currently shown resolution in the Format field.
~ When ALL is selected in the Input field, the Type field reflects Input 5.
Any triggering of the programming process changes inputs 5 through 8 to
the selected option in this field.
asf=`~ÄäÉ=bèì~ä
From the System Menu, select DVI Cable Equal to display the DVI Cable Equalizer
Menu, which enables you to adjust input cable equalization parameters for both DVI inputs
simultaneously, or individually for inputs 5 through 8.
Figure 4-50. DVI Cable Equalizer Menu (sample)
EDID Prog Done
Connect input cables
and reboot the PC
ESC = Continue
Note
At this point, reboot the external computer(s) in order for the
new EDID information to be read, and the new preferred
resolution to become available.
EDID Prog failed!
ESC = Continue
DVI CABLE EQUALIZER
> Input All
Equalization 12
Set to Default
Set to Maximum
Set to Minimum
