PDS • User’s Guide 73
4. Operation
Setup Menu
To change a setting, scroll to an input number and press SEL. Choose a new configuration
file and press SEL again. The change takes effect the next time the input button is
pressed.
Refer to the “About Input Configuration Files” section on page 48 for additional
information about setting, recalling, saving and deleting input configuration files.
qÉãéÉê~íìêÉ
From the System Menu, select Temperature to display the System Temperature Menu.
Figure 4-54. System Temperature Menu (sample)
The System Temperature Menu indicates the chassis’ internal temperature in both
Celsius and Fahrenheit. When the menu is displayed, temperature values update every 4
seconds.
Note that the PDS measures the internal temperature for an “over-temp” condition every 5
minutes. If the system’s internal temperature exceeds 122° F (50° C), the following
message appears:
Figure 4-55. Over Temperature Warning
To clear the message and continue operations, press ESC.
aá~ÖåçëíáÅë
From the System Menu, select Diagnostics to display the Diagnostics Menu:
Figure 4-56. Diagnostics Menu
SYSTEM TEMPERATURE
Temperature °F 85.8
Temperature °C 29.9
OVER TEMPERATURE
Contact factory if
condition persists.
ESC = Continue
Note
This message is a warning only, which does not prevent the
operation of the PDS. If this message appears, it is
recommended that you contact Barco Customer Service.
DIAGNOSTICS
> SEL = Start Tests
Output disabled up to
1 minutes during test
