PDS • User’s Guide 75
4. Operation
Setup Menu
qÉÅÜ=pìééçêí=jÉåì
From the Setup Menu, select Tech Support to display the Tech Support Menu:
Figure 4-59. Tech Support Menu
The Tech Support Menu displays the following information:
• Version — displays the current version of installed operating firmware. This
number changes when you update system software. In Chapter 6, refer to the
“Firmware Upgrade Overview
” section on page 96 for update instructions.
• Phone — lists the technical support phone number.
• Website Support Address— lists the web address for technical support.
c~Åíçêó=oÉëÉí=jÉåì
From the Main Menu, select Factory Reset to display the Factory Reset Menu:
Figure 4-60. Factory Reset Menu
This function enables you to reset the PDS to its factory default condition, in which all user-
defined input, output and system configuration files are deleted. When the command is
executed, a confirmation menu is shown.
• Press SEL to reset the system.
• Press ESC to cancel the operation, and return to the Setup Menu.
The following attributes constitute a “factory default” condition:
• Input 1 is on Program.
• The Output is set to 1024x768@59.94.
• The Output Raster Box is OFF.
• The Status Menu is displayed.
• All menu items are set to their default values (as specified in this chapter).
TECH SUPPORT
Version 01.00
Phone 866-374-7878
www.barco.com/esupport
Clear All Saved
Configurations?
<SEL> = Yes
<ESC> = No
