11
6 - TWO YEAR LIMITED WARRANTY
1. DURATION
The duration of the warranty for this McCulloch product is as follows: TWO (2) YEARS from date of original purchase only
when used for personal, family, household, farm or ranch, purposes, provided the unit is not used for rental purposes;
NINETY (90) DAYS from date of original purchase when used for commercial, professional, institutional or rental purpos-
es. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. MCCUL-
LOCH CORPORATION HEREBY DISCLAIMS ALL IMPLIED WARRANTIES AFTER THE APPLICABLE EXPIRATION
DATES OF THIS EXPRESS LIMITED WARRANTY. (Some states do not allow limitations on how long an implied warran-
ty lasts, so the above limitations may not apply to you.)
2. WHO GIVES THIS WARRANTY
McCulloch U.S.A 1-800-521-8559
12802 Leffingwell Rd. Santa Fe Springs, CA90670 USA
3. WHO RECEIVES THIS WARRANTY
A. The buyer (other than for purposes of resale) of the McCulloch Product.
B. Any person to whom such product is lawfully transferred within the duration of the implied or written warranty applica-
ble to the product.
C. Any other person who is entitled by the terms of the warranty or under applicable state law to enforce against the
Warrantor the obligation of the warranty.
(The above mentioned parties are hereinafter referred to as “User.”)
4. WHAT IS COVERED UNDER THIS WARRANTY
Any failure that occurs within the applicable duration of the warranty period that is the result of defects in materials or work-
manship.
5. WHAT IS NOT COVERED UNDER THIS WARRANTY
A. Any incidental or consequential damages that may result from the failure or malfunction of the McCulloch product.
(Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may
not apply to you.)
B. Any failure that results from an accident, User abuse, neglect or failure to operate the product in accordance with the
instructions provided in the User Manual(s) supplied with the product, or that results from improper servicing by an
unauthorized repair facility.
C. Normal adjustments which are explained in the User Manual(s) provided with the product.
D. Any component(s) or accessories not sold or manufactured by the Warrantor.
E. Predelivery setup or assembly of units.
F
.
This w
arr
anty does not apply to accessories, normal maintenance or adjustment(s) of the product set forth in the User
Man
ual(s).
6. RESPONSIBILITIES OF THE WARRANTOR UNDER THIS WARRANTY
A. Repair or replace components which have failed within the duration of the applicable warranty period at no cost to the
User.
B
. Ensure that the authorized repair station is reimbursed for parts and labor costs incurred due to performance of a war-
r
anty repair in accordance with estab
lished w
arr
anty policies and procedures
.
7. RESPONSIBILITIES OF THE USER UNDER THIS WARRANTY
A. The User must deliver or ship the McCulloch product covered under this warranty to the dealer from whom it was orig-
inally purchased or to the nearest Authorized Service Center. Proof of purchase is required.
B. Freight costs, if any, will be borne by the user.
C
.
Use reasonable care in maintenance, operations and storage of the product as explained in the User Manual(s).
8.
WHEN
W
ARRANT
OR WILL PERFORM OBLIGATION UNDER THIS WARRANTY
A.
Repair of w
arr
antab
le products will be scheduled according to the nor
mal w
or
k flo
w at the servicing location, depend-
ing on the availability of replacement parts.
B. Repair time which exceeds ten (10) days from the time the product was delivered to the servicing agent will extend
the warranty coverage by the number of days the product remains inoperable.
C
. If User does not receive satisfactory results from local servicing outlet, User must contact McCulloch Corporation, by
calling our toll-free telephone n
umber
.
10
Your Shredder has been designed for a low level of mainte-
nance
, involving routine cleaning and inspection.The motor
of the Shredder is maintenance free and requires no atten-
tion. For the best results the blades must be kept sharp at
all times. The blades have dramatically less cutting power
when blunt.
The Shredder will tear rather than cut when the blades are
blunt. When this occurs rotate the double sided blades or
replace the blades immediately.
WARNING
Before attempting any maintenance switch the machine off
and disconnect the power cord.
5-1. V-CUTTER MAINTENANCE
• Switch the machine off and disconnect the power cord
ensuring all moving parts are completely stopped.
• Wear gloves when attempting any maintenance to the
cutting blades.
JAMMING If blades become jammed see disassembly.
DISASSEMBLY
1. Loosen discharge chute access knobs and remove
the top cover assembly.
2. Rotate the cutter base counter clockwise and wedge
a piece of wood between the cutter base and cutting
chamber wall so as to stop the cutting base from rotat-
ing. (Fig. 5-1A)
3. Remove the center hold down bolt by turning it count-
er clockwise using a 16 mm wrench.
4. Remove the square washer, square bushing, V-cutter
to expose cutter base.
T
ake extreme care not to come in contact with cutting
blades.
If discharge chute becomes clogged or cutting blades
become jammed, under no circumstances should y
ou
place your hands in discharge chute to try to clear
obstruction, as this will lead to serious injury.
5-2. SHREDDING BLADES MAINTENANCE
WARNING
Before removing Top Hopper knob, insure the machine is
switched off, the red safety switch and extension lead is
removed and wait until the machine comes to a complete
stop.
To inspect or replace the double sided shredding blades
there is no need to remove the cutter base.To remove sim-
ply undo the counter sunk screws with the 6mm hex
wrench supplied with the machine and turn them through
180˚ These blades are double ground and can be used on
both sides. When blunt on both sides replace and insure
they are screwed in tightly.
ASSEMBLY This is carried out in the reverse sequence to
that of disassembly but with careful inspection of all com-
ponents. Ensure that cutter base is assembled with the
scraping plates facing down towards the motor and that
the square washer is situated under the head of the cen-
ter hold down bolt. (Fig. 5-2A)
Before replacing the top cover assembly ensure that the V-
cutter is positioned as shown in (Fig. 5-2B) Replace the top
cover assembly and secure tightly the discharge chute
access knob. If discharge chute access knob are not tight
the motor will not start due to the motor lock out switch not
being activated.
5-3. CLEANING
After use, always wipe clean the outside of the shredder to
remove any build up of material with a damp cloth. Clean
the inside of the cutting chamber and remo
v
e an
y left o
ver
material, Do not hose down with water.
5 - MAINTENANCE INSTRUCTIONS
5-1A
5-2A
5-2B
