Filter
Top Products
AM-170 250-Watt Professional Mixing
Amplier
One (1) Year Manufacturer Warranty &
Lifetime Technical Support
Designed in U.S.A.
Technical Support: (626) 820-0645
E-mail: techsupport@acesonic.com
Web site: www.acesonic.com
Acesonic USA, Inc.
161 S. 8th Avenue
City of Industry
CA 91746-3208
U.S.A.
© 2010 Acesonic USA, Inc. • All rights reserved
A M - 170
250-Watt Professional Mixing Amplier
®
plug has two blades and one prong. e wide blade
and the prong are safety features. If the provided plug
does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
6. Protect the power cord from being walked on or
pinched, particularly where it is plugged in to an
electrical socket and the point where it exits from the
rear of the device.
7. Only use the attachments and accessories specied
by the manufacturer.
8. Use only with a cart, stand, tripod, bracket or table
specied by the manufacturer or sold with the device.
When using a cart, use caution when moving the cart.
9. Unplug the product during lightning storms or
when it will not be used for long periods of time.
10. Refer all servicing to qualied service personnel.
Servicing is required when the unit has been damaged
in any way, such as when the power-supply cord or
plug is damaged, liquids have been spilled or objects
introduced into the enclosure, the device has been
exposed to rain or moisture, the product does not
operate normally or it has been dropped.
11. Never push objects of any kind into this product,
through jacks or other openings, as they may contact
dangerous voltage points or short-circuit components,
thus causing re or electrical shock.
12. is product should be operated only from the
type of power source indicated on the product label
and in this User Manual. If you are not sure of the
type of power supplied to your home, consult your
product dealer or local utility.
13. An outside antenna system should not be located
in close proximity to overhead power lines, or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, be extremely careful not to
touch such power lines or circuits, as contact with
them could be fatal.
14. Do not overload wall outlets or extension cord
as this can increase the risk of re, power outages or
electrical shock.
15. When replacement parts are required, be sure the
service technician has used replacement parts specied
by the manufacturer or with the same characteristics
as the original part. Unauthorized substitutions may
result in re, electric shock or other hazards.
16. Following any servicing or repair of this product,
ask the service technician to perform the appropriate
safety checks to ensure the product is in proper
operating condition.
17. e product should not be mounted to a wall or
ceiling except as recommended by the manufacturer,
with a mounting accessory recommended by the
manufacturer.
18. If your product is not operating correctly or
exhibits a marked change in performance, and you
are unable to restore normal operation by following
procedures in this User Manual, do not attempt to
service it yourself. Opening the enclosure may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualied service personnel.