Filter
Top Products
FEATURES
Feedback Eliminator - KM-360's real-time feedback eliminator processor was designed
to provide state-of-the-art feedback elimination processing, while maintaining a simple
control interface. You just select one of the 3 room sizes and it will automatically filter out
howling feedback noise from the speakers. This is a necessary function for any venue that
is looking for a professional sound environment or any KJ who are looking to prolong your
speakers' life.
Vocal Eliminator - KM-360 has a powerful vocal eliminator processor that can take out up
to 90% of vocals from any regular audio CD. The KM-360's DSP utilizes one of the most
powerful vocal elimination algorithm which removes more vocal with less impact on the
background instruments. You can easily turn any regular CD into a karaoke track and begin
your karaoke performance.
Music Volume Auto Leveling - When you play audio tracks, some songs are louder than
others even though the volume of your system remains the same. When you turn on the
"Music Volume Auto Leveling" function, the KM-360 Mixer will automatically adjust your
music to one of the six preset volume level. If your music level is too low, the KM-360 will
boost the audio signal, and if the music is too loud, it will decrease the music volume back
to your pre-set volume level. This function will eliminate lots unnecessary adjustment for
KJs.
Digital Effect Processor - The KM-360 has a powerful built-in Reverb and Echo Effects
that can dramatically increase the quality of your performance. A "reverb" is created when
a sound is produced in an enclosed space causing a large number of echoes to build up and
then slowly decay. Reverb is most noticeable when the sound source stops but the
reflections continue, decreasing in amplitude, until they can no longer be heard. The KM-
360 enables you to adjust the reverb time, reverb level, echo repeat and echo delay to
optimize your sound effects.
5-Band Music and Microphone Equalizer (EQ) - The KM-360 has two independent 5
band equalizers for the music and microphone volume. Using a powerful EQ, it can
compensate for your music or singer's shortcomings or when you would like to add more
treble or bass to your performance. For music, the 5 band frequencies are at 100Hz,
330Hz, 1000Hz, 3.3 kHz and 10 kHz. For the microphone, the frequency bands are at
100Hz, 300Hz, 900Hz, 2.7 kHz and 8kHz. You can fine tune each frequency to your desired
level.
Multiple-Channel Surround Sound Configuration - The KM-360 has additional audio
signal outputs for center speaker (C), sub-woofer (S), and 2 rear speakers (SR). You can
configure the mixer using one of the many types of settings from 2.0 (L+R), 3.0 (L+C+R),
2.1 (L+R+S), 3.1 (L+C+R+S) and 5.1 (L+C+R+SR+SL+S). Using one of the many
surround sound configurations will help you create the enveloping effect inside of a
concert hall.
Microphone Noise Gate - This powerful auto-mute function enables your mixer to
automatically turn off the microphone when it is not in-use. The powerful noise gate
function allows a microphone signal to pass through only when it is above the preset
threshold value from 1 to 40. The mixer utilizes an advanced fading technique to cut in
and out of sound so you will not hear your microphone abruptly cut off once it has fallen
below the threshold or hear a loud click when the noise gate re-opens from mute.
5 Microphone Inputs with 2 XLR Input Connectors - The KM-360 includes 3
microphone inputs in the front and 2 balanced audio connectors (XLR) for high quality
microphone signal inputs from the rear. This XLR connector allows for the use of long
cables while reducing susceptibility to external noise. You can ensure to transmit the
upmost vocal signal to your KM-360 Mixer using the XLR inputs. The rear inputs also
enable you to connect to most wireless microphone units while reducing the messy cables
going from the front.