Filter
Top Products
Adding Phantom Power to Unbalanced Amplifier Inputs
Cleaning
To clean the metal surfaces, use methylated spirits or alcohol.
Standard Accessories
H 85 shock mount
Optional Accessories
B 18 battery power supply
MK 9/10 10-m audio cable with 3-pin XLR connectors
N 62 E AC power supply for two microphones
N 66 E AC power supply for six microphones
PF 100 studio pop filter
SA 41/1 stand adapter
ST 102 A floor stand
ST 200 heavy floor stand
W 4000 external windscreen (supplied with the C 4000 B)
Specifications
Type: condenser pressure gradient
microphone
Polar patterns: cardioid
Sensitivity at 1000 Hz: 20 mV/Pa ־ - 34 dBV
Frequency range: 30 to 20,000 Hz (refer to frequency
response curve)
Electrical impedance: ≤ 200 ohms
Recommended load impedance: ≥ 1000 ohms
Bass cut filter slope: 6 dB/octave below 500 Hz
Preattenuation pad: -10 dB, switchable
Equivalent noise level
to IEC 60268-4: 30 dB
Equivalent noise level
to IEC 60268-4 (A-weighted): 20 dB-A
Signal/noise ratio re 1 Pa
(A-weighted): 74 dB*)
Max. SPL for 0.5% THD (0/-10 dB): 200 / 630 Pa ־ 140 / 150 dB SPL*)
Dynamic range: 120 dB (A-weighted)*)
Environment: - temperature: -10°C to +60°C
- (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F),
85% (+60°C/140°F)
Power requirement: 9 to 52 V phantom power
to IEC 61938
Current consumption: ≤ 2 mA
Connector pinout: 3-pin male XLR to IEC standard
Size: max. dia.: 53 mm (2.1 in.),
length: 159 mm (6.3 in.)
Net weight: 325 g (11.5 oz.)
*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for
12 V phantom power.
8
For optional accessories, refer to the current AKG catalog or folder, or
visit www.akg.com. Your dealer will be glad to help.
This product conforms to the standards listed in the related Declaration
of Conformity. To order a free copy of the Declaration of Conformity for
this product, visit http://www.akg.com or contact sales@akg.com.