Filter
Top Products
30 C 414 XLS / XLII
5 Cleaning
5.1 Microphone
5.2 Windscreen
• Use a soft cloth moistened with water to clean the surface of the microphone body.
• Wash the foam windscreen in mild sudsy water. Do not use the windscreen before it
has dried completely.
6 Specifications
Type: 1-inch large-diaphragm pressure gradient microphone
Polar patterns: nine, selectable
Open-circuit sensitivity: 23 mV/Pa (-33 dBV ± 0.5 dB)
Frequency range: 20 to 20,000 Hz (see frequency response traces)
Impedance: ≤ 200 ohms
Recommended load impedance: ≥ 2200 ohms
Bass cut filter slopes: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Preattenuation pads: -6 dB, -12 dB, -18 dB (selectable)
Equivalent noise level to IEC 60268-4: 20 dB (0 dB preattenuation)
Equivalent noise level to IEC 60268-4 (A-weighted): 6 dB-A (0 dB preattenuation)
Signal/noise ratio re 1 Pa (A-weighted): 88 dB
Max. SPL for 0.5% THD: 200/400/800/1600 Pa ־ 140/146/152/158 dB SPL
(0/-6/-12/-18 dB preattenuation)
Dynamic range: 134 dB min.
Max. output level: 5 V rms (+14 dBV)
Environment: temperature: -10°C to +60°C
R.H.: 95% (+20°C); 85% (+60°C)
Powering: 48 V phantom power to IEC 61938
Current consumption: approx. 4.5 mA
Connector: 3-pin XLR (pin 2 hot)
Dimensions: 50 x 38 x 160 mm / 2 x 1.5 x 6.3 in.
Net weight: 300 g / 10.6 oz.
Patents: Electrostatic transducer (patents nos. AT 395.225,
DE 4.103.784, JP 2.815.488, US 7,356,151)
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of
Conformity, visit http://www.akg.com or contact sales@akg.com.
BDA_C414VPL_D030834_Hex 02/27/2009 10:27 Seite 30 (Schwarz/Black Auszug)