Filter
Top Products
Specifications
Type: 1-inch large diaphragm pressure
gradient microphone
Polar patterns: cardioid
Sensitivity at 1000 Hz: 20 mV/Pa (-34 dBV ±2 dB)
Frequency range: 30 to 20,000 Hz (refer to frequency
response curve)
Electrical impedance: ≤ 200 ohms
Recommended load impedance: ≥ 1000 ohms
Bass cut filter slope: 6 dB/octave below 120 Hz
Preattenuation pad: -20 dB, switchable
Equivalent noise level
to DIN 45 405 (CCIR 468-2): 20 dB
Equivalent noise level
to DIN 45 412 (A-weighted): 8 dB-A
Signal/noise ratio re 1 Pa
(A-weighted): 86 dB*)
Max. SPL for 0.5% THD (0/-10 dB): 350/3000 Pa ־ 145/165 dB SPL*)
Dynamic range: 137 dB (A-weighted)*)
Environment: - temperature: -10°C to +60°C
- (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F),
85% (+60°C/140°F)
Power requirement: 9 to 52 V phantom power
to DIN 45 596/IEC 268-15
Current consumption: ≤ 2 mA
Connector pinout: 3-pin male XLR to IEC standard
Size: max. dia.: 58 mm (2.3 in.),
length: 183 mm (7.2 in.)
Net weight: 450 g (1 lb.)
*) Values for 48 V phantom power; reduce by 6 dB for 24 V and 18 dB for
12 V phantom power.
This product conforms to standards EN 50 082-1 and EN 60 065.
Frequency Response Curve
Polar Pattern
7