Filter
Top Products
16 D12 VR
Specifications
Transducer Principle: dynamic pressure gradient transducer
Polar Pattern: cardioid
Frequency Range:
17 -
17.000 Hz (±2 dB)
Sensitivity at 1000 Hz passive: 1,2 mV/Pa ± -58 dBV
Electrical Impedance at 1000 Hz: < 200 Ohm
Recommended Load Impedance: > 1.000 Ohm
Maximum SPL for 0,5 % THD: 164 dB SPL
Climatic Conditions:
temperature range: -10 °C - +70 °C
relative humidity at +20 °C: 90 %
Connector Type: three-pin male standard XLR
Connector Wiring: pin 1: ground pin
pin 2: AF (in phase)
pin 3: AF (out phase)
Housing Material: metal
Finish: front grille: glossy galvanized nickel matte,
rear grille: matte black paint
Dimensions (H x W x D):
125 mm x 101 mm x 66 mm
Weight:
500 g
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of
the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com.
Frequency Response Curve Polar Pattern
Green - switch position left
Red - position middleswitch
Blue - positionswitch right
D12 VR 0°
D12 VR 180°
5 Specifications