Filter
Top Products
3 Interfacing
3.1 General
Section 3 applies to both the
PERCEPTION 120
and the
PERCEPTION 220
.
The microphone uses a condenser transducer de-
signed for 48-volt phantom powering to DIN 45 596/
IEC 268-15 and needs an external power supply.
3.2 Pinout
Themicrophone providesa balancedoutputon a3-
pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
3.3 Connecting the Microphone
Refer to fig. 2.
1. Use anXLR cable toconnect the microphoneto
a balanced XLR input with phantom power.
2. Switch the phantom power on.(Refer to the user
manual of the unit to which you connected your
microphone.)
5
Fig.2:Connectingtoabalancedinputwithphantom power.
AKG PERCEPTION 120/220