AKG Acoustics WMS 40 PRO Microphone User Manual


 
RADIO LINKS FOR PORTABLE INSTRUMENTS
AKG WMS 40 PRO FOR INSTRUMENTS
More and more musicians prefer wireless
microphones, so AKG was asked to create
a wireless system specifically for "mini-
mally invasive" miking of acoustic instru-
ments with no on-board pickup. The
proven AKG MicroMic Series microphones
in conjunction with the AKG PT 40 PRO
bodypack transmitter and SR 40 PRO
portable receiver provide a solution offer-
ing exceptional quality, price/perfor-
mance, and flexibility. Since the high
quality MicroMic Series microphone cap-
sules require high-performance production
lines they are made at the AKG factory in
Vienna, Austria. Expensive UHF technolo-
gy has been optimized for the specific
requirements of wireless systems for
smaller venues such as clubs, rehearsal
rooms, or local community centers.
The WMS 40 PRO provides fully profes-
sional audio and UHF transmission quali-
ty adjusted to the needs of musicians on a
budget. The MicroMic Series includes a
wide choice of small, light microphones
designed for easy mounting on various
instruments and liberates musicians from
the constraints imposed by stand-mounted
microphones.
Of course, all MicroMics will leave no trace
on the instrument when you remove them.
Using an AKG WMS 40
PRO
wireless sys-
tem with AKG MicroMic Series micro-
phones is an optimum solution for acoustic
guitar, violin, banjo, zither, accordion, vari-
ous wind instruments, and many other
applications. Each instrument system
includes an MKG L cable.
PT 40 FLEXX
bodypack transmitter
MKG L cable
INSTRUMENTAL SET FLEXX
Maximum flexibility
Three selectable frequencies for interference-free
reception, input gain control on transmitter.
• Single channel with three selectable frequencies
• Diversity receiver
• Adjustable squelch
• Multichannel capability for using up to nine*
channels simultaneously
• Rugged construction
SR 40 FLEXX
receiver
Rear panel and battery compartment
Viewing window for checking the battery type.
Frequency and color code label for easy frequency identification
in a multichannel system.
Frequency selector for easy tuning to one of the three preset
frequencies.
GAIN matches the sensivity of the transmitter’s audio section to
the output level of the connected instrument.
14 www.akg.com
AKG WMS 40 PRO INSTRUMENTS
6052_WMSKern_engl.qxd 01.03.2006 11:52 Uhr Seite 14