Filter
Top Products
BALANCED +4dBu
BALANCED +4dBu
RIGHT
OUT
LEFT
OUT
GHIBLI 16
FX
16-CHANNEL MIXING CONSOLE
WITHDIGITAL EFFECTS
PHONES
CENTER &
SURROUND OUT
AUX2 OUT
AUX1 OUT
LTO
R
34
30
31
32
33
4.24 CENTER & SURROUND OUT
This is Center and Surround output of the mixer. You can pick
up their signals using an insert cable.
4.25 AUX1 OUT
This is the AUX1 output, it is useful to connect active monitors
to the mixer.
4.26 AUX2 OUT
This is the AUX2 output, using its signal it is possible to feed
an external effect processors, wiring the effect return to one
of the stereo channels of the mixer.
4.27 PHONES
This socket will be used to send the signal to a pair of head-
phones as well as active monitors.
4.28 MAIN MIX OUTPUT
This stereo output is controlled by the MAIN MIX LEVEL on
the front panel and will send the audio signal to an external
amplifier. It is electronically balanced and it has got a profe-
ssional standard level of +4dBu. You can use both for stereo
and for surround system wiring.
30
31
32
33
34
-20 100-10
LEFT
RIGHT
OPERATING
+10
-
8
0dB
PHONES
MAIN MIX LEVELMAIN MIX LEVEL
BYPASS ON
BASS ENHANCERBASS ENHANCER
25
28
26
27
29
4.19 OPERATING LED
The operating LED, when is on, shows that the main power
supply is present and the mixer is operating.
4.20 PHONES
This control sets the amount of signal sent to the PHONES
output.
4.21 VU METER
It is the output VU meter of the mixer, it shows both the left
and right output signal level.
4.22 BASS ENHANCER
This is the BASS ENHANCER processor switch. Inserting this
processor it is possible to increase and optimize the general per-
formance at low frequency of the mixer.
4.23 MAIN MIX LEVEL
This control sets the amount of signal sent to the MAIN MIX
LEFT and RIGHT outputs.
25
26
27
28
29
9
4.29 REAR PANEL
- POWER SUPPLY
Used to connect the supplied 24V AC adapter, supplied by .
LTO company only
- POWER ON/OFF SWITCH
This switch is used to turn the main power ON and OFF.
POWER
SUPPLY
POWER
ON
SERIAL
MODEL
36 35
35
36