Filter
Top Products
24
22
27
28
26
29
30
23
25
20 21
31
LINE 1
CH-1
PHONO 1
AUX 1
L
R
AUX2 PHONO2
AUX1 PHONO1
GND
115V
AC IN~
MIC
LIGHT
CONTROL
PLAYER CONTROL
B A
SERIAL NO:
MODEL NO: Q-2221/X
POWER SOURCE:
115/230V~ 50/60Hz 20W
MADE IN TAIWAN
!
REC
OUTPUT
MASTER
LINE 2
CH-2
PHONO 2
AUX 2
GND
230V
Rear Panel - Functions and Controls
20. AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the selector is
set to the proper voltage you are using.
21. PLAYER CONTROL - Input mini plugs from CD player controller into these jacks, input CD 1 into
jack A and CD 2 into jack B.
22. LIGHT CONTROL - Buffered audio output for light controllers that can use external input. Great for
Touch Panels and Chase Controllers.
23. MIC JACK - Connect your microphone with 1/4 inch (6.3mm) jack plug here. The signals may be controlled
by the DJ MIC CONTROL KNOB (19). BASS & TREBLE can be adjusted by the DJ MIC BASS CONTROL
KNOB and the DJ MIC TREBLE CONTROL KNOB (19).
24. AC CONNECTION - Standard IEC plug with detachable AC power cord.
25. MASTER OUT - Parallel output of P.A. output. Connect with the input of a power amplifier.
26. REC OUT - Connect to your record unit. The REC OUT level is not influenced by the master control.
27. CHANNEL 2/LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected
to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack
represents the right channel input and the white represents the left channel input.
28. CHANNEL 2/PHONO 2/AUX 2 INPUT JACKS - The type of input must directly reflect the selected mode
of the Aux/Phono Selector Switch (29). Connect turntables equipped with MM pickup cartridge to PHONO
inputs. CD players or Tape Decks should be connected to AUX LINE input. Line level musical instruments
with stereo outputs such as Rhythm Machines or Samplers should also be connected to AUX LINE inputs.
The red colored RCA jack represents the right channel input and the white represents the left channel
input.
32
©American DJ Supply® - www.americandj.com - Q-2221/X User Instructions page 7