Filter
Top Products
Model: Q-2411 4 Channel Mixer
POWER SUPPLY: AC 115v~60Hz/230v50Hz, User Selectable
DIMENSIONS: 482.6mm (W) x 177mm (D) x 97mm (H)
WEIGHT: 6.6 Lbs. / 3.0Kgs.
CROSSFADER: Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION: 12W typical, 20W w/ full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
OPERATING TEMPERATURE: 5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence): Note: 0dBV output, load = 47K OHM
LINE, AUX: 10K OHM / -14dBV (200mV) +/-2dB
PHONO: 47K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 1: 2.2K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 2: 2.2K OHM / -60dBV (1mV) +/-2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
MASTER: 300 OHM
MASTER OUT (XLR): 600 OHM / 2.21dBm (1V) +/-2dB
REC OUT (RCA): 2.2K OHM / -10dBV (316mV) +/-2dB
PHONES: (LOAD=32 OHMS) 33 OHM, CUE IN / 0dBV (1V) +/-2dB
Maximum Output: (LOAD = 47K, THD = 1%)
MASTER/ZONE: MORE THAN 18 dBV (8.0V)
PHONES: (LOAD=32 ohms) MORE THAN 4.6dBV (1.6V)
CHANNEL BALANCE: WITHIN 3dB
Frequency Response:
LINE/AUX: 20 - 20KHz +1 /-2dB
PHONO: 20 - 20KHz +2 /-3dB (RIAA)
MICROPHONE: 20 - 20KHz +2 /-3dB
Noise: (maximum output) IEC-A weighted
LINE/AUX: LESS THAN -90dBV
PHONO: LESS THAN -66dBV
MIC 1: LESS THAN -66dBV
MIC 2: LESS THAN -60dBV
THD - Total Harmonic Distortion: (MASTER = 0dBV OUTPUT, w/ 20KHz LPF, EQ Flat):
LINE: LESS THAN 0.02% 20 - 20KHz
CROSS TALK: (MASTER = 0dBV OUTPUT)
LINE: -65dB OR LESS AT 1KHz BETWEEN L AND R
-70dB OR LESS AT 1KHz BETWEEN CHANNELS
EQ:
MASTER: +10 +/-2dB AT 60, 250, 1K, 4K. and 16KHz
-10 +/-2dB AT 60, 250, 1K, 4K, and 16KHz
Q-2411™ SPECIFICATIONS
©American Audio® - www.americanaudio.us - Q-2411™ Instruction Manual Page 19