Filter
Top Products
Model: Q-D5 MKII, Professional 2 Channel Preamp Mixer
POWER SUPPLY: AC 115/230V, 50/60Hz Selectable
DIMENSIONS: 10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
WEIGHT: 6.5 Lbs. / 3 Kg
CROSSFADER: Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION: 21W typical, 23W w/ full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input Sensitivity (Level/Impedence): LOAD=47K OHM
LINE: 14dB (200mV)/30K Ohm ±2dB
PHONO: -50dB (3mV)/47K Ohms ±3dB
MICROPHONE: -54dB (2mV) /6K Ohms ±3 dB
AUX: -14dB (200mV)/47K Ohms ±2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms,
LOAD=47K OHM
MASTER OUT (RCA): 0dBV (1V)/1K Ohm ±2dB
REC OUT (RCA): -10dB (316mV)/1K Ohm ±3dB
PHONES (LOAD=32 OHMS): -3dB (0.7V)/33 Oms ±3dB
Maximum Output (Load = 47K, THD = 5%)
MASTER (RCA): MORE THAN 18dB (8V)
REC: MORE THAN 18dB (8V)
PHONES (Load=32 ohms): MORE THAN 5dB (1.7V)
CHANNEL BALANCE: Within 3dB
Frequency Response:
LINE: 20Hz - 20KHz, +2/-3dB
PHONO: 20Hz - 20KHz, +2/-3dB
AUX: 20Hz - 20KHz, +2/-3dB
MICROPHONE: 20Hz - 20KHz, +2/-3dB
Output Noise (IEC-A WEIGHTED):
LINE/AUX: LESS THAN -68dB
PHONO: LESS THAN -65dB
MIC: LESS THAN -58dB
THD - Total Harmonic Distortion (1Khz, 0dB Output):
MASTER OUTPUT (LOAD = 47K OHMS): Less than 0.08%
PHONO: (LOAD = 32 OHMS): Less than 0.15%
CROSS TALK:
< 55dB @ 1Khz between left and right channels
Channel Equalizer:
BASS: +12 ±3dB / Less Than -19dB at 70Hz
MID: +12 ±3dB / Less Than -14dB at 1KHz
TREBLE: +13 ±3dB / Less Than -24dB at 13KHz
Microphone Equalizer:
BASS:
±12, ±2dB at 100KHz
TREBLE: ±12, ±2dB at 10KHz
Q-D5 MKII™ Specifications
©American Audio® - www.AmericanAudio.us - Q-D5 MKII™ Instruction Manual Page 15