American Audio Versadeck DJ Equipment User Manual


 
©American Audio® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 31
The VERSADECK comes with four built in effects. These effects can be used one at a time or you
may choose to overlap the effects and use up to four at a time. The Built-in effects include Echo,
Filter, Skid, and Flanger. You can choose to use the effects with their default parameters or you may
choose to customize each effect by changing the parameters. The parameter values for all the effects
will range. Some effects will have more adjustable parameters than others. The parameters have two
adjustable values, PR (Parameter Ratio) and PT (Parameter Time). All parameters will be reset to
there default values when power is shut off!
SKID EFFECT: The Skid effect simulates the stop and start time of
a turntable platter. The Skid Effect has two adjustable parameters,
Parameter Time (PT) and Parameter Ratio (PR). The PT will adjust the
Start Time and the PR will adjust the Stop Time (see "Parameters" on
page 32).
Figure 39
Figure 38
FILTER EFFECT: The Filter effect tweaks the original sound to add dif-
ferent tonal definition. The Filter Effect has two adjustable parameters,
Parameter Time (PT) and Parameter Ratio (PR). The PT will adjust the
time it takes for the filter to sweep the frequency band, and the PR will
adjust the Frequency Range; 0 is the low end, 155 mid range, & 255 high
end frequencies. (see "Parameters" on page 32).
ECHO EFFECT: The Echo effect adds an echo to your out-
put signal. The Echo effect has two adjustable parameters,
Parameter Time (PT) and Parameter Ratio (PR). The PT will ad-
just the time range and the PR will adjust the dry to wet ratio;
000 (Dry)-255 (Wet) (see "Parameters" on page 32).
BUILT-IN EFFECTS
Figure 40