Filter
Top Products
Technical Specications - Model XDM-250T
Model: XDM-250T/Turntable Pro, 2 Channel Mixer
POWER SUPPLY: AC 10V, 500mA - 6.3mm Jack
DIMENSIONS: 7.55 ” W x 9.3 ” D x 3.22 ” H
WEIGHT: 5.2 Lbs./2.3 kg
CROSSFADER: Optical detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION: 5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature 5 to 35 deg. C
Humidity 25 to 85% RH (non-condensing)
Storage Temperature -20 to 60 deg. C
Input Sensitivity (Level/Impedence): LOAD=47K OHM
LINE: -14dBV /12K OHM +/- 3dB
PHONO: -50dBV /47K OHM +/- 3dB
MICROPHONE: -54dBV /3K OHM +/- 3dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
ITEM 0dBV OUTPUT
MASTER OUT (RCA): 0dBV /220 OHM
PHONES (LOAD=32 OHMS): -3dBV /33 OHM +/- 3dB
Maximum Output (Load = 47K, THD = 5%)
MASTER (RCA): < 18dBV (8V)
PHONES (Load=32 ohms): < 6dBV (2V)
CHANNEL BALANCE: Within 3dB
Frequency Response:
LINE: 20Hz - 20KHz, ± 2dB
PHONO: 20Hz - 20KHz, +2,-3dB (RIAA)
MICROPHONE: 20Hz - 20KHz, +2,-3dB
Output Noise (IEC-A WEIGHTED):
LINE/AUX: LESS THAN -70dBV
PHONO: LESS THAN -65dBV
MIC: LESS THAN -55dBV
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
MASTER OUTPUT (LOAD = 47K OHMS): Less than 0.2%
PHONO: (LOAD = 32 OHMS): Less than 0.3%
CROSS TALK: < 40dB @ 1Khz between left and right channels
Channel Equalizer:
LOW: +15 / -22 +/- 3dB AT 70Hz
TREBLE: +15 / -19 +/- 3dB AT 13KHz
Components and parts are subject to change for improvements within the range of the specications.
XDM-250T™ Specifications
©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 11