Filter
Top Products
©American DJ Supply® - www.americandj.com - Groove Wheel™ Instruction Manual Page 5
Groove Wheel™ Warranty Registration
The Groove Wheel™ carries a 90 day limited warranty. We recom-
mend you fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty, you must provide a copy of your proof
of purchase invoice. Please contact American DJ® customer support
for a R.A. number.
©American DJ Supply® - www.americandj.com - Groove Wheel™ Instruction Manual Page 6
90 DAY LIMITED WARRANTY
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be
free of manufacturing defects in material and workmanship for a period of 90 days from the
date of purchase. This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s responsibil-
ity to establish the date and place of purchase by acceptable evidence, at the time service
is sought.
B. For warranty service, send the product only to the American DJ® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ® will pay return shipping charges only
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ® shall have no liability whatsoever
for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product
is modied in any manner which American DJ® concludes, after inspection, affects the reli-
ability of the product; if the product has been repaired or serviced by anyone other than the
American DJ® factory unless prior written authorization was issued to purchaser by Ameri-
can DJ®; if the product is damaged because not properly maintained as set forth in the
instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specied above, American DJ® will replace defective
parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of American DJ® under
this warranty shall be limited to the repair of the product, or replacement thereof, including
parts, at the sole discretion of American DJ®. All products covered by this warranty were
manufactured after January 1, 1990, and bear identifying marks to that effect.
E. American DJ® reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ® in connection with this product, including
warranties of merchantability or tness, are limited in duration to the warranty period set
forth above. And no warranties, whether expressed or implied, including warranties of mer-
chantability or tness, shall apply to this product after said period has expired. The con-
sumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ® be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ® Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
H. Lamps are not covered under this warranty
Groove Wheel™ Warranty
Groove Wheel™ Fuse Replacement
Fuse Replacement: To replace the protective fuse, use a at head
screwdriver to unscrew and remove the fuse holder. Gently remove the
old fuse and replace it with a new one. Insert the fuse holder back into
the fuse housing and tighten. Always replace with the exact same type
fuse removed unless otherwise specied by an authorized American
DJ® service technician.
Caution: Always disconnect the units main power before performing
any type of service or fuse replacement!
For any other service related issues, please contact American DJ®
customer support.
Groove Wheel™ Lamp Replacement
Lamp Replacement: Caution! Never open the unit while in use.
Always disconnect the main power before attempting to replace the
lamps. Allow the unit ample time to cool before replacing lamps
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Unscrew the two thumb screws on the bottom of the unit.
3. Remove lamp cover to expose the lamp/socket assembly.
4. Gently remove and discard the old lamp.
5. Insert the new lamp in the lamp/socket assembly and reassemble.
Remember to always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American DJ
®
service technician.